The Prince is made of stainless steel and has a pyrex tank the is easily filled from the top.
Unlike former TFV versions, it has a smart lock-function which prevents you from accidentally opening the fill hole (a very nice feature when you're holding 8ml e-juice).
The tank has a base diameter of 25mm and 25 or 27.6mm by the glass, depending on what glass you use.
The Prince comes with a very stylish acrylic wide bore drip tip with a snake pattern (hence the name Cobra). It fits the look of the tank perfectly. Note: You cannot use 510 drip tips on the TFV12 Prince...but that would be like trying to inhale a cheeseburger through a straw anyway.
The Prince is a muscle tank that demands plenty of space!
The tank will hold 5ml with the standard tank section, and a massive 8ml if you mount the extended glass.
-and believe us: You will need all the juice capacity you can get with this Bad Boy tank!
Top-fill and AFC:
The TFV12 Prince features a nice and easy top-fill, with the nice protection from a small locking system.
To fill the tank: Press the small tap on the side of the tank. You can now push the top cap back and get access to the fill holes. When you're done, simply push the cap back in place. The tank then locks automatically.
The AFC (Air Flow Control) is massive as it is required for a muscle tank of this calibre.
The TFV12 has two large air holes in the bottom that if left wide open and will give you an airflow that is equal to trying to suck the Eurotunnel dry in one pull!
-dear mouth-to-lung vapers: This is not the place for you!
World class coils:
The replaceable coils for the TFV12 Prince are nothing short of amazing.
*Note: You cannot use coils from the earlier models for the TFV12. You need the special TFV12 Prince coils.
Smok has re-designed the coil structure and patented them in order to give you a vape experience you'll find nowhere else:
The V12 Prince-Q4 coil has a Quad (4 Wire) vertical coil set-up that will let you vape at 0.4 Ohm.
It will perform best between 60 - 80 Watts.
The V12 Prince-X6 coil has a Sextuple (6 wire) dual vertical coil set-up that will let you vape at 0.15 Ohm. It will perform best between 80 - 100 Watts.
The V12 Prince-T10 coil has a Decuple (10 wire) vertical dual coil set-up in 5 separate compartments and will let you vape at 0.12 Ohm. It will perform best between 80 - 110 Watt.
All the coils have huge juice channels that will ensure a smooth flow even at high Watts and 100% organic Japanese cotton wicks.
Remember: You cannot use these coils for the other tanks in the TFV series.
NOTE: Please ensure that your coil is totally soaked in liquid before you use it. Failure to do so will result in the cotton in the coil dry-burning and will ruin the coil.
The purchase is for: 1 x Smok TFV12 Prince tank. 1 x Spare 8ml pyrex tank.
1 x V12 Prince-Q4 coil.
1 x V12 Prince-X6 coil.
1 x V12 Prince-T10 coil.
1 x Widebore Cobra drip tip.
1 x Spare insulator for the fill hole.
Bag with spare O-rings.
*Purchase is for above-listed items only. Other products are shown as inspiration.
**SubOhm requires special equipment. You need either a V/W Mod of at least 30W or a Mechanical Mod that can handle sub ohm. When using a mechanical Mod a battery with 35 Amp or higher is required.
***What is “Sub Ohm”?
The short version is that sub ohm is vaping on a coil with a resistance lower than 1.0 Ohm.
Ohm is the resistance of the wire in your coil.
What do you need to know when you want to vape sub ohm? First of all, you need to get batteries that are strong enough for sub ohm as it requires a lot of Amps (Amps denote the power of a battery, mAh tells you how long a battery can run before it needs recharging).
If you use a mechanical (mech) Mod, which is an e-cigarette without any form of electronics, it is pivotal that you know what you are doing as a mech Mod does not have any safety features that can stop accidents from happening
To determine the correct battery/coil set up on a mech Mod, you need to know and understand Ohm’s Law.
A sub ohm coil will usually require more power (Wattage/Voltage) than a coil with a higher Ohm, especially if you go below 0.5 Ohm.
Sub ohm will usually give you a hotter and more powerful vapour, which might not be what you are looking for if you are a “regular vaper”.
However, if you like a plentiful and powerful vape, sub ohm is probably right for you.
When vaping sub ohm, you will normally use “Direct Lung inhalation” where you suck the vape directly into your lungs as opposed to more “cigarette-like” vaping where you suck the vapour into your mouth and then make a second inhalation to get it into your lungs.
Direct Lung inhalation takes a bit of practice and is not right for everyone but a lot of vapers love it when they have got used to it.
Another difference between sub ohm and “regular” vaping is that when you vape sub ohm the amount of e-liquid you use will often increase, simply because more power will vaporise more e-juice.
TFV12 Prince visit i Sort og Stål farve.
Til Højre med lige pyrex glas monteret, til venstre med bobble glasset monteret.