Pink Mule S.L.
Newsletter
email icon

Newsletter


Subscribe!

Sigelei Fuchai GLO 230W Mod 230 Watt 2 x 18650

Price: DKR 485.00
Ex Tax: DKR 388.00
Brand: Sigelei
Product Code: Sigelei Fuchai GLO
Size: 45 x 30 x 88
Availability: Notify me

Accessories


LIPO GUARD SAFETY CHARGING BAG - SMALL LIPO GUARD SAFETY CHARGING BAG - SMALL DKR 49.59 Qty:
Overall accessories:
0.0
Total product with accessories:
DKR 485.00
    - OR -   Add to Wish List
Add to Compare

 

 

party colours and plenty of power

The Sigelei Fuchai GLO is a delicious, funky and extreamly powerful Mod with a lot of advanced possibillities and cool features, like a large TFT colour screen and beautiful LED light effects at the bottom.

If you're into serious power vaping with a bit of funky colours on the side, The  Fuchai GLO is definitely worth checking out!
 

  • From 10 to 230 Watts / TC: 100°-300°C (200°-570°F)
  • Choose kanthal, nickel, titanium, stainless steel and TCR modes.
  • Super cool LED light effects at the bottom of the Mod.
  • Large 0.96" TFT colour screen.
  • Uses two 18650 flat top battery of at least 35Amp. (Sold separately).
  • Size: 88mm x 47.3mm x 32.2mm.


If you're in the vape-game for the power, look no further that the Sigelei Fuchai GLO.
You get a massive 230W of muscle to play with besides all the other great features.
If you prefer a more "civilized vape" on lower Watts you will be rewarded with an almost ridiculous long vape-time...and get all the features as well!
Either way, the Kaos is a relatively small Mod that can be used by any vaper.
-and you can still enjoy all the features and the cool LED lights.
Let the vape-party begin!


Features:

  • Quality steel/ stainless steel construction.
  • Springloaded, goldplated 510 connection.
  • Large 0.96" TFT colour screen on the side of the Mod.
  • LED lights around the bottom of the Mod. Can be set for 6 different colour effects or turned off.
  • Uses two 18650 flat top battery of at least 35Amp. (Sold separately).
  • Micro-USB port for charging the batteries in the Mod and for Firmware update.
  • Min/max Ohm in all power modes:  0.05 - 3.0 Ohm
  • Variabel Wattage: 10W - 230W.
  • Volt output: 1 - 7.5V
  • Max Amp output: 35A.
  • Note the Volt and Amp max: To run 230W you will need a coil with a resistance between 0.19 and 0.24 Ohm.
  • Power adjustment in Watt or Fahrenheit/Celcius mode.
  • In TC "Temperature Control" mode you can use Ni200 Nickel, TI titanium or SS stainless 304/316/317 steel coil.
  • Temperature: 100°C - 300°C / 200°F - 570°F.
  • 5 memory slots allow you to fine-tune the co-efficient (the resistance) of SS or other types of wire.
  • 5 click On/Off.
  • 3 click to access the menu.
  • Press Fire and Down to lock the adjustment buttons.
  • The pre-heat feature allows you to set a higher Watt in the beginning of every pull. Works in both Watt and TC mode: Press Fire and Up to adjust the pre-heat.
  • To lock the Ohm when using TC:
    • Press and hold "Up" and "Down" Buttons. 
    • Choose "Read" and press "Fire".
    • The press and hold "Up" and "Down" again.
    • Choose "Lock". Your Ohm is now locked and you are ready for TC vaping. 
  • 10-second cut-off.
  • Reversed pole protection.
  • Short circuit protection.
  • Low resistance/ohm protection.
  • High/low Voltage protection.
  • Overheating protection.
  • Size: 88mm x 47.3mm x 32.2mm.


The Fuchai GLO Mod:

The Fuchai GLO is a solid steel construction with a nice goldplated, springloaded 510 pole that will allow most tanks to sit flush on the top.

On the side, the large Fire button is perfectly placed for your fingers and the adjustment buttons are placed over the screen.
The nicely rounded design makes it a pleasure to hold in your hand.

However, the most amazing and outstanding feature is the huge 0.96" TFT colour screen on the side of the Mod.
It will simply give you every info possible about your vape: Battery status for each individual battery, Ohm, Voltage and Amp.

On the bottom of the Mod you'll find a "transparent" band. The LED lights are placed behind this and you can choose from 6 funky "disco-lights" that you can activate to your pleasure...or simply shut off if it's not your thing (or if you're playing hide and seek in the dark).

The Fuchai GLO allows you go from 10 to 230W in normal power mode which means it will run resistances between 0.05 - 3.0 Ohm.
That is indeed a lot of power. Therefore it is pivotal that the Fuchai GLO have all the safety features you'll need to "vape powerful but vape safe".

Note that the Fuchai GLO has a max output of 7.5Volts and 35Amp.
What this means in practice is that you cannot hit the full 230W with any Ohm. Only if the Ohm is between  0.19 and 0.24Ohm will you be able to max out the Mod.
However there is plenty of power for any Ohm, so don't worry.

The nice pre-heat feature allows you to start ever pull with a higher Watt than the regular setting. You set the pre-heat by pressing Fire and Up and this can be done in both Watt and Temperature Control (TC) mode.

You can also choose to let loose in Temperature Control (TC) mode and can then set the heat of your coil/wire between 100°-300°C (200°-570°F) and vape away between 0.1 - 3.0 Ohm.
In TC Mode you can use Nickle, Titanium and Stainless Steel 304 and 317 wire.

Remember to lock the Ohm when using TC:

  • Press and hold "Up" and "Down" Buttons.
  • Choose "Read" and press "Fire".
  • The press and hold "Up" and "Down" again.
  • Choose "Lock". Your Ohm is now locked and you are ready for TC vaping. 

If you are a true vape-geek you can even set the TCR (Temperature Co-efficient of Resistance) and thereby adjust your vaping-setting with millimetre precision according to your wire.
That's pretty hardcore.

TCR (Temperature coefficient of resistance) is a description of how much the resistance (Ohm) of the wire rises when heated.
TCR values for different types of wire to further improve the accuracy of the Mod’s ability to limit and sense an atomizer coil’s temperature.


Batteries, charging and firmware update:

The Fuchai GLO uses two 18650 flat top batteries.
Sigelei recommends that you use a 35 Amp battery or stronger.

When using a dual battery Mod is very important that you: 

  • Get two new, strong batteries (minimum 35 Amp)
  • Make sure they are identical (same brand, same mAh and Amp limit).
  • Only to use them together and at the same time.
  • Charge them together and for the same time.

The batteries have to be Flat Top.

To change the battery:
Press the battery lid and push it out. Flip up the lid and you can put in the batteries.
Reverse the process to close the lid. 

On the side of the box you'll find a Micro-USB port that can be used for charging the batteries in the Mod. The Mod can charge with a massive 2.5 Amp (very fast charging) but you can of course use an external charger like this as well.

The Micro-USB port is also used for updating the Firmware of the chip. This ensures that you always have access to new features and functions Future updates can be downloaded here
 

The Sigelei Fuchai GLO box includes:

1 x Sigelei Fuchai GLO 230W.
1 x USB charging/upgrading cable.
1 x User manual.


Batteries not included!
The batteries have to be Flat Top.

*Purchase is for above-listed items only.

** The Sigelei Fuchai GLO 230W is a Mod for the very advanced vaper.
It is an extremely powerful Mod with a lot of advanced settings and adjustments so it is vital that you know what you are doing when using it.

Pink Mule does not offer any warranty if the Mod is damaged due to incorrect use.

 

 

     

 

 

 

 

 

 

 

 

 

 

 

 

 

 

***What is “Sub Ohm”?

The short version is that sub ohm is vaping on a coil with a resistance lower than 1.0 Ohm.
Ohm is the resistance of the wire in your coil.

What do you need to know when you want to vape sub ohm?
First of all you need to get batteries that are strong enough for sub ohm as it requires a lot of Amps (Amps denote the power of a battery, mAh tells you how long a battery can run before it needs recharging).

If you use a mechanical (mech) Mod, which is an e-cigarette without any form of electronics, it is pivotal that you know what you are doing as a mech Mod does not have any safety-features that can stop accidents from happening

To determine the correct battery/coil set up on a mech Mod, you need to know and understand Ohm’s Law.
A sub ohm coil will usually require more power (Wattage/Voltage) than a coil with a higher Ohm, especially if you go below 0.5 Ohm.

Sub ohm will usually give you a hotter and more powerful vapour,  which might not be what you are looking for if you are a “regular vaper”.
However, if you like a plentiful and powerful vape, sub ohm is probably right for you.

When vaping sub ohm, you will normally use “Direct Lung inhalation” where you suck the vape directly into your lungs as opposed to more “cigarette-like” vaping where you suck the vapour into your mouth and then make a second inhalation to get it into your lungs.
Direct Lung inhalation takes a bit of practice and is not right for everyone but a lot of vapers love it when they have got used to it.

Another difference between sub ohm and “regular” vaping is that when you vape sub ohm the amount of e-liquid you use will often increase, simply because more power will vaporise more e-juice.

 

 

 

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:




#

Support: +34 9246520 75 / +349246520 72
Or we can call you. Please  write your telephone no:

(Remember your country code: 0047 xxxxx)

email icon

Phone

#

For you who wants to start waping...

We have compiled instructions, offers and more.

Read more

email icon

new to vape