Whether you are a smoker who wants to try out vaping for the first time or a seasoned vaper, the Innokin Endura T20 Kit is an e-cigarette that definitely deserves a second look.
Built-in 1500mAh battery.
Tank will hold aprox. 2ml of e-juice.
Full kit size: diameter: 20mm height: 129.2mm.
With a 1500mAh battery and a nice 2 ml tank with easy top-fill and a design that is made for being carried around with you wherever you go, this is a set that will fit most vapers perfectly.
Made from 304 steel.
Constant Volt output: 4.5V.
Max. 3.5Amp output.
510 atomizer/tank connection.
Passthrough capability (once the battery has a small charge it can be used whilst charging).
3 click on/off.
Built-in 1000mAh battery.
15 second cut off (if the Firebutton is pressed for 15 seconds it will turn off the battery until re-pressed).
Low voltage warning. When the battery power reaches 3.3V it will turn off automatically and indicated by a flashing LED light.
Short circuit function.
Battery display function
70% - 100% LED is green.
30% - 69% LED yellow.
0% - 29% LED red.
Diameter: 20mm, length: 81.2mm
Made from stailess 304 steel and Pyrex glass.
Air slots at the bottom by the 510 connection.
3 standard 510 drip tip's included.
One replacable 1.5 Ohm coil (dual kanthal A1 wire with organic cotton wick).
Capacity: Aprox. 2.5 ml.
Large windows lets you check the juice level.
Size: Diameter 20mm, Height 48mm.
The Innokin Endura T20 is a complete and ready-to-go e-cigarette that is amazingly easy to use and has a lot of nice features like e.g Passthrough that will let you keep on vaping while you charge it.
It has a very nice cap that will protect the mouthpiece/drip tip when you carry it in your pocket. The cap can be clicked onto the bottom of the battery when you vape.
The Micro-USB port is used for charging via your computer or a wall plug (wall adapter sold separately here) is hidden behind a small cap at the bottom of the battery.
The battery will charge at 1 Amp and you turn it on and off with 3 clicks on the Firebutton and a LED light will let you keep track of the battery level.
On the top of the battery you will find a 510 connection with a gold plated pole to ensure maximum conductivity. The 510 connection means that you can use a long line of brilliant tanks on the Endura battery.
The battery provides a constant 4.5Volt output which means that your vape experience will be the same from start to finish.
The battery has a max. Wattage output of 13W.
The tank is very good as well. When you want to fill it, simply unscrew the top cap with the drip tip and pour e-liquid down the sides of the glass (not in the centre tube!).
Then simply screw the top back on and you're good to go.
Inside the tank you'll find the coil that heats up the e-juice and turns it into vapour.
The Endura T20 comes with a 1.5 Ohm coil that will give you a splendid "cigarette-vape" where you first suck the vapour into your mouth and then down into your lungs.
The coils has a 100% organic cotton coil that will ensure a very clear flavour from your e-juice.
When it is time to change the coil simply unscrew the bottom of the tank and take it out. Then insert a fresh coil (make sure it fits in the two slots) and leave the new coil in a full tank of juice for 15 minutes before use. That way you ensure that the wick is fully saturated. *NOTE: You cannot use T18 or T22 coils for the Endura T20. The coils you'll need can be foundhere.
The Endure T20 is a very nice and sturdy e-cigarette. Its ease of use makes it perfect for the beginner but its performance is good enough to satisfy even a seasoned vaper.
An experience not to be missed!
The Kit Contains:
1 x Innokin Endura T20 1500mAh battery.
1 x Innokin Endura T20 tank.
1 x Replacable 1.5Ohm coil (pre-mounted).
3 x 510 drip tips.
1 X Protection cap.
1 x USB cable.
Bag with spare O-rings.
1 x User Manual.