Pink Mule S.L.
Boletim informativo
email icon



Vaporflask V2.1 DNA40 (TC) - Gunmetal

Preço: DKR 2,531.25
Sem impostos: DKR 2,025.00
Marca: Andre
Código do produto: VAPORFLASK GM
Tamanho: 22 x 59.7 x 91.7
Disponibilidade: Em estoque


Efest LUC V4 Charger (4 Batteries) Efest LUC V4 Charger (4 Batteries) DKR 219.00 Qtd:
ADAPTER 510 - EGO ADAPTER 510 - EGO DKR 18.60 Qtd:
Kanger Temperature Sensing Coil TSC - 5pcs Kanger Temperature Sensing Coil TSC - 5pcs DKR 175.00 Qtd:
Aspire Nautilus Temperature Sensing Coil TSC  x 5 Aspire Nautilus Temperature Sensing Coil TSC x 5 DKR 175.00 Qtd:
Acessórios geral:
O produto total com acessórios:
DKR 2,531.25





The design, the choice of materials and the massive techincal features has made the Vaporflask a huge succes. We at Pink Mule are proud to present Vaporflask v2.1 to our customers.

  • Chip: Evolv DNA 40
  • 1-40 Watt and 1-9 Volt
  • Made from a solid block of 6061 Aluminium. Fingerprint resistant.
  • Can go as low as 0.6 Ohm
  • Highly tactile and ergonomical design.
  • Power adjustment in Watt or Farenheit/Celcius-mode.

The Look:

The first thing you notice is the pure aesthetics and the tactile feel of the flask. Once you hold the curved shape in your hand you will not want to let go.

It is made from High Quality 6061 aluminium and even though it features a stunning two 18650 batteries it is still amazingly compact. With a spring loaded 510 connection your atomizers will always be in absolute flush with the flask. You can choose to replace the batteries and charge them externally or you can charge them in the flask by using the provided Mini USB-cable. It even has a pass through option so you can vape while you charge it up!

The Chip:

The inside is just as impressive, if not more so. The incredible Evolv DNA 40 Chip will allow you to go as low as 0.6 Ohm while still running the power at 40 watt. Also, because of the two-battery design, it will even run a highly power demanding Sub Ohm set up for a long, long time.

The temperature control:

The Evolv DNA 40 chip also allows you to use temperature control when using an Ni200 nickle thread. Simply set the temperature and your Vaporflask will stay there. Even if you run out of e-juice the DNA chip will automatically turn down the watts right untill they hit zero. So there's no longer any risk of dry burns. Wow!

The final say:

All in all Vaporflask is in a league of its own when it comes to features, build quality and aesthetics. However, don't be fooled: This is not JUST a boxmod for the High End vaper, this is an equally wonderful Mod for the novice or semi-experienced vaper too. Quality and design are for everybody, not just "the clever few".

Vaporflask is much more than just an e-cigarette. It is an experience! It is a trip into the amazing world of vaping and the perfect companion to show you just how good a vape can be!

Very important! The Vaporflask does NOT have reverse battery protection. If you put the batteries in the wrong way, they will immediately fry the Evolv chip, thus destroying the Vaporflask. The positive pole of both batteries ALWAYS has to be inserted first.


  • Chip: Evolv DNA 40.
  • Highly tactile and ergonomical design.
  • Made from High Quality 6061 aluminium.
  • Will fit a ø22mm atomizer perfectly.
  • Spring loaded Fat Daddy 510 atomizer connection.
  • OLED screen on the top of the Vaporflask
  • Uses 2 x 18650 batteries. (Please note: Only use flat-top batteries. It is recommended to use Sony VTC batteries. And remember the plus-pole has to go in first!)
  • Mini USB cable for charging the batteries internally.
  • Pass through option: Vape while the batteries are charging.
  • Ohm-range when using regular kanthal wire/coil: 0.6 - 2 Ohm. 
  • Ohm-range when using Ni200 Nickel wire/coil "temperature control"  from 0.10 - 1 Ohm.
  • Pre-heating of ni200 nickel thread.
  • Variable Watt from 1W - 40W in 0.1 Watt increments.
  • Power adjustment in Watt or Farenheit/Celcius-mode.
  • Current outlet: 16 Ampere maximum.
  • Volt from 1V - 9Volt
  • Short circuit protection.
  • Low resistance/Ohm protection.
  • Low Volt protection.
  • Overheating protection.
  • Dimensions: 91.7mm x 59.7mm x 22mm


Presented in giftbox with the following content:

  • 1 x Vaporflask V2.1 DNA 40
  • 1 x USB charging cable.
  • 1 x Velvet storing pouch.


*Batteries are to be bought separatly. It is recommended to use SONY VTC flat-top batteries in your Vaporflask. Other brands of batteries might not fit in the Vaporflask.


*Other colours and related products are available.











Escreva uma avaliação

Seu nome:

Avaliação: Note: HTML não foi traduzido!

Classificação: Ruim           Bom

Digite o código no campo abaixo:


Sim, eu gostaria de chamar-me!

Lembre-se de código de país
Exemplo: 0039 xxxx

email icon



For you who wants to start waping...

We have compiled instructions, offers and more.

Read more

email icon

new to vape