Pink Mule S.L.
Boletim informativo
email icon



Imperial Mods Fumo RDA V2 - 22mm

Preço: DKR 575.00
Sem impostos: DKR 460.00
Marca: Andre
Código do produto: FUMO V2
Tamanho: 22 x 22 x 30.6
Disponibilidade: Em estoque




Imperial Mods presents the Fumo V2 RDA (Rebuildable Dripping Atomizer), that will give you all what a good dripper should: Fantastic taste and huge clouds.

  • Made from high quality 316 stainless steel.
  • Choose between vertical and horizontal coil builds.
  • Designed for easy use with mesh wick but can also be used with cotton.
  • Diameter: 22 mm.

Danish Imperial Mods has made the Fumo V2 and once again we have to acknowledge that Danish Design truly stands out from the crowd.

Clear and beautiful design:
The Fumo V2 features a clean and clear cut design that will give most Mods a beautiful hybrid-look. With the diameter being "the golden 22" - meaning 22mm - this will make it fit flush on many, many Mods, and any vaper knows that flush is funky!

Mesh and Vertical build options:
The Fumo V2 is designed for vertical coil building. This gives you ample opportunity for using mesh as coil in a non-genesis atomizer. A mesh coil will ensure the most authentic taste from your e-juice and if you haven't tried building with mesh before you will be pleasantly surprised.
However, if you prefer horizontal coils and cotton wick, The Fumo V2 allows this as well.

Impressive AFC:
The AFC (Air Flow Control) on the Fumo V2 is made up of two 1 x 4 mm /1.5 x 4.5 mm / 2 x 5 mm holes and is easily adjusted by twisting the top cap. This allows you to set it from "tight as a misers wallet" to "a hurricane and a half" so even hardcore Cloud Chasers will not be disappointed!

One RDA, many good ideas:
The bottom line is that the Fumo V2 is a modern and brilliant dripper with a good mix of tried and tested features and a few new nice ideas.
You will not be disappointed!



  • Made from high quality 316 stainless steel.
  • Choose between vertical and horizontal coil builds.
  • Single- or dual coil bulid options.
  • Designed for easy use with mesh wick but can also be used with cotton.
  • Will hold aprox. 0.8 ml of e-juice.
  • Laser engraved logo.
  • Standard drip tip in 316 stainless steel.
  • AFC: Two 1 x 4 mm /1.5 x 4.5 mm / 2 x 5 mm.
  • 2 negative allen key screws and 1 positive pole with finger screw.
  • Adjustable 510 centerpin.
  • O-rings and an allen key for the negative poles included.
  • Presented in a gift pouch with Imperial Mods logo.
  • Diameter: 22 mm.

*No kanthal or wick is included with this product. We suggest you purchase some if you don't already have it.

  • This is an advanced re-buildable atomizer. There is a risk of damaging your Mod or your batteries if your coil set-up is wrong. 
  • It is strongly recommended that you always test your coils with a multimeter/Ohm-meter before attatching the atomizer to your Mod/battery.
  • Coils with a low resistance (Ohm) are not suitable for all Mods/batteries. It is recommended that you make sure that your Mod/battery is able to handle low Ohm before using a low/SubOhm coil/atomizer. 

*The guarantee applies to errors in manufacture only.







Escreva uma avaliação

Seu nome:

Avaliação: Note: HTML não foi traduzido!

Classificação: Ruim           Bom

Digite o código no campo abaixo:


Sim, eu gostaria de chamar-me!

Lembre-se de código de país
Exemplo: 0039 xxxx

email icon



For you who wants to start waping...

We have compiled instructions, offers and more.

Read more

email icon

new to vape