Pink Mule S.L.
Notiziario
email icon

Newsletter


Iscriviti alla notiziario!

SBody Macro by VaporShark - DNA40 (TC) - Blue

Prezzo: DKR 928,71
Prezzo IVA esclusa: DKR 742,97
Marca: VaporShark
Codice Prodotto: MACRO02A
Dimensione: 75 x 34.8 x 22
Disponibilità: In magazzino

Accessori


XTAR VC4 charger - 4 Slots XTAR VC4 charger - 4 Slots DKR 275,00 Qtà:
XTAR VP2 charger - 2 Slots XTAR VP2 charger - 2 Slots DKR 307,85 Qtà:
1 x Samsung INR 25R 18650 2500 mAh 35 Amp - Flat Top 1 x Samsung INR 25R 18650 2500 mAh 35 Amp - Flat Top DKR 94,00 Qtà:
Accessori generali:
0.0
Prodotto totale con accessori:
DKR 928,71

 

 

COMPACT DESIGN - EXTENDED FEATURES

The term "Sneaky Vaping" just got a whole new meaning.
The SBody Macro from Vaporshark gives you High End features like Temperature Control in a truly tiny box.

 

  • Ultra-compact design.
  • Temperature or Wattage controlled vaping.
  • Chip: Evolv DNA40.
  • Size: Aprox. 75 mm x 34.8 mm x 22 mm.

The boys from Vaporshark seem to outdo themselves time and again and thank God for that.
This time they present what must be described as any stealth-vapers dream: The SBody Macro is so small you can hide it in your palm. The features however, are still top of the game.
 

A very very small box:

The size of the SBody is aprox. 75 mm x 34.8 mm x 22 mm. Get out a ruler and draw the outline on a piece of paper. It is tiny!
The weight is minimal too which means that this High End Mod is the perfect companion for the discerning vaper who likes to be able to have a puff withouth the whole world knowing about it.

When you add the amazing Evolv DNA40 chip to the mix there should be no need for further advertising. This box will practically sell itself!
 

Wattage or Temperature:

Let's make it clear: The SBody Macro is not just for vapers who want to vape using Temp. Control. This Mod has an excellent, high performance Wattage-mode that lets you vape between 1.0 - 40W. This means you can use resistances as low as 0.16 Ohm and all the way up to 2.0 Ohm. Watt-mode vaping requires kanthal wire and you can use both RBA's (Rebuildable Atomizer) and atomizers with replacable coils.

However, you can certainly use Temp. Control if you wish. This means setting the max temperature for your coil and locking the Ohm. This will eliminate the possibillity of getting "dry-hits" and the wick will never get burnt. The Evolv DNA40 is one of the very best and most reliable chips for Temp. Controlled vaping so you'll have a hard time getting a better set-up for heat controlled vaping.
Note that you must use nickel wire in your coil when using the Temperature-mode. This, however, is quite easy as you can buy ready made Ni200 coils for most atomizers and then it's no harder than replacing any other coil.
 

Lightning fast charging:

The SBody Macro has a new system called Zip-Charge that will allow you to charge the battery in your SBody more than twice as fast as in other Mods. This may not sound terribly fancy but chances are that this is the function you're gonna love the most in day-to-day use.
The box is powered by a single 18650 battery that you can easily remove, using the magnet controlled battery lid. This allows you to charge the battery in an external charger, and put a fresh battery in the SBody straight away.

If by accident you should put the battery in the wrong way, a safety feature protects your Mod from damage to the chip.
 

The Vaporshark SBody Macro is one of those Mods we seriously consider not to sell but just keep all to ourselves. It is a truly amazing tiny little box!


Features:

  • Made from Aluminium.
  • Uses 1 x 18650 battery (minimum 16 Amp).
  • Max output: 40 Watt.
  • Springloader goldplated 510 connector.
  • 5 click on/off.
  • Compatible with any 510 atomizer (ego tanks require a 510-ego adapter).
  • Large OLED screen displays: Wattage, Voltage, resistance and battery life.
  • Size aprox. 75 mm x 34.8 mm x 22 mm.

DNA 40 features:

  • Output Watt: 1 - 40 Watt with 0.1Watt increments.
  • Output Volt: 1 - 9 Volt.
  • Current Out: Max 23 Amp. 
  • Atomizer resistance using Kanthal:  Min. 0.16 Ohm, Typically 0.7 Ohm, Max 2.0 Ohm.
  • Atomizer resistance using Ni200 Nickel Min. 0.1 Ohm, Typically 0.4 Ohm, Max 1.0 Ohm.
  • Lock-Ohm function.
  • Temperature mode: Celcius or Fahrenheit.
  • Temperature limits: 100°C - 300°C (200°F - 600°F)
  • OLED screen.
  • Reverse battery protection.
  • High/Low Ohm protection.
  • Temperature protection.
  • Pre-heating of nickel wire.

 

Purchase is for:

  • SBody Macro DNA40 Mod.
  • 1 x USB charging cable.

*PLEASE NOTE: The SBody Macro requires 18650 flat top batteries.

**Purchase is for above listed items only. Other products are shown as inspiration.

 

 

 

 

 

 

 

 

 

 

Scrivi una recensione

Il Tuo Nome:


La Tua Recensione: Nota: Il codice HTML non è tradotto!

Punteggio: Negativo           Positivo

Inserisci il codice nel box di seguito:




#

Sì, mi piacerebbe chiamare me!

Ricorda codice del paese
Esempio: 0035 xxxx

email icon

telefono

#

For you who wants to start waping...

We have compiled instructions, offers and more.

Read more

email icon

new to vape