Innovation by Innokin: The Disrupter is no less than a module-based e-cigarette/Mod.
And boy, is that CLEVER!
Unique module system lets you change the LiPo battery unit.
Endless colour combinations for control and battery module.
Variable Wattage 6W - 50W / Voltage 3V - 7.5V.
Will allow atomizer resistance from 0.2 - 3 Ohm.
Size - 92.7mm x 32.25mm x 22.5mm.
The idea behind the Disrupter is that you'll get the benefits of a replacable battery but with at strong LiPo battery. At the same time this allows you to design your e-cigarette to fit your style, as both the control and battery-module come in a wide range of funky colours.
Power for any kind of vape:
What you buy here is the Control-module for the Disrupter. The module needs to be used all the time, while the batteries are replacable.
The Disrupter is an e-cigarette/Mod with a lot of power, from 6 - 50 Watts and 3 - 7.5 Volts. This allows for a vaping range from 0.2 - 3 Ohm and makes the Disrupter perfect for both SubOhm and "normal vaping".
Unique battery system:
You can only use Innokin's own Innocell battery modules for the Disrupter. This is pretty clever, as you never have to worry about if your set up is correct.
Attaching the battery module is easy: Slide the module down on the control module frol the top, using the slots, and click it in place when it is all the way down. Then you're ready to vape!
You detatche the modul by reversing the process. Easy!
A great thing by having a module based e-cigarette, is the ability to choose from 7 funky colours for the battery and 3 for the module. So there is no excuse if your vaper doesn't mix in with your speedoes or shoelaces!
Besides all the innovative features, Innokin has filled the Disrupter with loads of cool features that will ensure that your vaping is not only phenominal but also safe:
Good and sturdy buttons with a nice "click" complete with a bright OLED screen that informs you of Watt/Volt, the Ohm of your coil and the battery level of the Innocell module you are using. It also contains a springloaded gold plated 510 connector for maximum conductivity and lots of safety features.
The Disrupter is protected from: Low Ohm, short circuit of your atomizer, low battery level and even has a build in heat protector.
Nothing is left to chance with the Disrupter.
The Disrupter: Module-based quality vaping. There is power in numbers!
Material: Aluminium and steel.
Gold plated springloaded 510 connector.
Detachable 2000 mAh LiPo battery (sold separately).
Passthrough "vape as you charge" function.
Variable Wattage from 6.0W - 50.0W (0.5 increments).
Variable Voltage from 3.0V - 7.5V (0.1 increments).
Can run resistances from 0.2 - 2.5 Ohm.
Max current output: 20A.
Max output strøm - 20A.
Battery level LED indicator by the Firebutton:
Green LED - Fully charged (more than 3.75 Volt).
Yellow LED - Half charged (between 3.6 - 3.74 Volt).
Red LED - Low battery/needs charged (below 3.6 Volt).
Battery low-volt warning. When the leve reaches 3.3V the Disrupter turns off. Change or charge battery module.
3 click on/off.
Switch from VW to VV by press and hold "Down" and Fire (remember the "down" is the top arrow key).
Switch from VV to VW by press and hold "Up" and Fire (remember the "Up" is the bottom arrow key).
Puff counter: Press and hold "up" and "down" button. Is reset when battery is changed.
Rotate the screen: Press and hold "up" and "down" button for 3 seconds.
OLED screen displays: Wattage/Voltage, the Ohm of your coil and the battery level.
15 second cut off.
Short circuit protection.
The Disrupter remembers your Watt/Volt setting when changing the battery module.
Size: - 92.7mm x 32.25mm x 22.5mm.
Purchase is for:
1 x Innokin Disrupter - 50W Control Module.
1 x User Manual.
Remember charging cabel and Innocell battery module
The Disrupter - 50W control module is available in 3 different colours and will allow almost endless colour combinations with the Innocell battery unit that is available in 7 colours. *Sold separately.
Disrupter and Innocell together.
Disrupter - Control Unit (The brain) from the front.
Disrupter (control unit) seen from behind where the Innocell (battery) is mountet.
*Innocell battery Module is available in 7 funky colours.