These replacable atomizer coils for the Melo 2 and the iJust 2 tanks are made with a stainless steel base and 100% organic cotton wick maximum flavour from your liquid.
The coil wire is 0.40mm kanthal wire and has a resistance of 0.5 Ohm.
If you want maximum power and performance from your Melo 2 or iJust 2 tank, this is excactly what you need!
Purchase is for:
5 pca Eleaf Melo2/iJust2 kanthal coils with a resistance of 0.5 Ohm.
*Note: Always remember to Prime your coil before 1st use.
Inside the coil there is cotton, which is how the liquid is sucked into the hot wire. If this cotton is not soaked with juice ALL TIMES and right from the start, it will burn, then the coil becomes damaged and you must then just insert the new one.
You prime the coil by dripping e-liquid into all holes in the coil. Approximately 2 drops onto each .
Then you fill up the tank, put it back together it and leave it for about 10-15 minutes before you use it. Remember to go SLOWLY up in Watts with a new coil, not just to start out " at full speed ". This can also ruin your coil.