Can be tilted and turned without risk of leakage or gurgling
Contains up to 1.6 ml liquid
That’s the best you can get at the moment. VISION has everything you’ve been missing in previous versions ... and more. It’s simply a notch better than other models.
To fill your VISION, remove the corresponding drip tip (you can only use the matching drip tip), hold the VISION at an approx. 45 degree angle and fill directly from your bottle with a spout.
In addition to being a superb clearomizer, it looks very elegant on an Ego/Fly battery and makes your e-cigarette altogether presentable.
NOTE: On some Fly 1300 models you can’t use Vision without a 510-Ego adapter (Ego-T-Ego)
You get excellent results if you use it on your high-voltage vaporizer. To do that you need an Ego-T-Ego adapter or 2 x 510-510 adapters screwed together.
To make sure you get the most out of your CE4, take care to screw the drip tip in as far as it goes. In this way, you obtain a hermetic seal which protects against ingress of liquid.
Low resistance (2.1–2.5) is good for standard e-cigarette batteries with more than 450 mAh, and high resistance (2.5–2.9) is best for W/VW such as Lavatube, ProVari and VV/VW MODS.
PLEASE NOTE: IF YOU’VE ORDERED A SPECIFIC COLOUR WHICH IS OUT OF STOCK, AND WE HAVEN’T YET REGISTERED IT, WE’LL DISPATCH ANOTHER COLOUR TO AVOID DELAYING YOUR ORDER.
A user has given us this excellent tip:
“You have to continue drawing after letting go of the button on the battery. Unless you remove all vapour from both the small metal tube and the mouthpiece with each draw, the vapour will proceed to settle on the silicone button (i.e. in the mouthpiece which fits over the mantel), and a little bit will continue into the small metal tube and trickle down through the air tube to the battery. This results in a bit of gurgling, and liquid from the mouthpiece will enter your mouth. Voila! With this minor change of technique, these mizers are almost perfect”.