Vaporesso Revenger X 220W MOD + NRG Mini Tank Kit
Uses 2x18650 (Batteries not inculded)
Vape-guru's Vaporesso presents a new take on extreme subohm vaping with this Revenger X 220W set of Mod and tank.
As the name implies you get a massive 220W of power at your fingertips besides advanced features like Temperature Control (TC) etc.
On top of the Mod is the excellent NRG Mini subohm tank that will match the performance of the Mod.
- Revenger X Mod:
- Variable Wattage from 5W - 220W, in 1 Watt increments.
- Temperature control: 100° - 315°C / 200° - 600°F.
- Use nickel, titanium or stainless steel wire in TC Mode.
- Self-adjusting stainless steel 510 connection.
- Size Mod - W: 28mm x L: 45mm x H: 89mm.
- NRG Mini Tank:
- Capacity 2ml.
- Easy top-fill.
- Size Tank: Diameter 23mm, height 47mm.
If you feel like taking on serious sub ohm vaping, this set is the ultimate opportunity to take off at rocket speed.
The dual 18650 battery set-up ensures plenty of power and a long vape-time besides.
Revenger X Mod Features:
- Material: Stainless steel with IML (In-Molded Labeling sprayed on aluminium) sides.
- Variable Wattage: 5-220W, in 1.0W increments.
- Temperature Control: 100° - 315°C / 200° - 600°F in 10° increments.
- Resistance in Watt- and TC mode: 0.05 - 5.0 Ohm.
- Press and hold Menu to enter System Settings.
- Lock your Ohm in TC Mode by pressing Up and Menu button, a padlock is shown on the display.
- Adjustments and Menu button are touch buttons.
- Well lid 0.96"OLED screen.
- 5 click on/off.
- Self-adjusting stainless steel 510 connection.
- 10 second cut off.
- High temperature protection.
- Atomizer short circuit protection.
- Low Voltage battery protection.
- Uses two 18650 flat top batteries of at least 30 Amp. (Sold separately).
- Battery lid with 3 strong magnets.
- Micro-USB port used for charging batteries in the Mod and for updating the Firmware.
- Size - W: 28mm x L: 45mm x H: 89mm.
NRG Mini Tank Features:
- Material: Stainless steel.
- Pyrex glass tank tube.
- Liquid capacity: Approx. 2ml.
- Easy top fill.
- Wide bore Delrin drip tip (not 510 drip tip compatible).
- 510 connection.
- AFC (Air Flow Control): Two large and fully adjustable air slots.
- 100% organic Japanese cotton.
- NRG GT 4: Dual coil (4 wires) of 0.15 Ohm. (30W-70W)
- NRG GT 8: Four coils (8 wires) coil of 0.15 Ohm. (50W-110W)
- Size: diameter 23mm, height 47mm (including drip tip and 510 connection)
The Revenger X 220W:
The Revenger X 220W is a solid construction made from steel and aluminium. The sides have a special IML (In-Molded Labeling sprayed on aluminium) coating that is incredible durable and makes the screen clear to see.
One of the sides is the battery lid which is kept in place by three strong magnets.
The Mod has a stainless steel spring loaded 510 connection that will ensure that almost any tank will sit flush on the Mod.
The large 0.96" OLED screen will keep you informed about the battery status, the Ohm of your coil, your Volts and your Watt/TC settings.
Rotate the screen by pressing and holding Up and Down.
Underneath the OLED screen there is three Touch buttons. The two at the side are Up and Down, underneath a button in the middle lets you go into the menu.
The size of 89mm, 45mm and 28mm is surprisingly compact given the dual 18650 set-up.
Watt or Temperature:
The Revenger X 220W can be used in Wattage, Bypass or Temperature Control (TC) mode.
When using Watt mode, you can go from 5 - 220W which is enough for heavy Subohm (actually as low as 0.15 Ohm) but you can obviously use it for any kind of vaping, even if you prefer "a civilized vape" on lower Watts and higher Ohms.
Bypass Mode works like a Mechanical Mod where the battery fires everything it has all the time and the output then falls as the batteries discharge. (Note that you still get the safety features from the chip!)
In TC mode you can use nickel Ni200, titanium Ti or Stainless Steel SS316 coils in the range 100° - 315°C / 200° - 600°F.
You can adjust the Watts in TC Mode through the menu.
Remember to lock your Ohm when vaping in TC mode.
You do this by pressing and holding Down and Menu buttons together. You will then see the Ohm sign on the screen change to a padlock.
Your coil must be at room temperature when you lock it.
The Revenger X 220W has 3 power modes: Soft, Norm and Hard.
This allow you to set the power for the first 1.5 second when you press Fire.
After that the power returns to the regular Watt setting.
If you are a true vape-geek you can even set the TCR (Temperature Co-efficient of Resistance) and thereby adjust your vaping-setting with millimetre precision according to your wire.
That's pretty hard core.
TCR (Temperature coefficient of resistance) is a description of how much the resistance (Ohm) of the wire rises when heated.
TCR values for different types of wire to further improve on the accuracy of the Mod’s ability to limit and sense an atomizer coil’s temperature.
The Revenger X 220W have all the safety features you need for vaping safe at all times and at all Watts.
Batteries and charging/update Firmware:
You need two 18650 flat top batteries (minimum 30 Amp) in the Revenger X. (Batteries sold separately).
The battery lid is kept in place by 3 strong magnets so it is easy to change the batteries.
You can charge the batteries in the Mod. Vaporesso's "Equlizing Charge System" ensures that each battery is separately but still 100% synchronized charged and with a charging Amp of 2.5 you'll get a nice quick charge.
You can of course charge the batteries in an external charger as well.
The Mini USB port can also be used for updating the Firmware.
Note: When using a Mod with multiple batteries you should always buy identical batteries (same brand, same mAh, same Amp) and always use them and charge them together and for the same period of time.
The NRG tank:
The NRG is a full-blooded subohm tank that will take you into low low Ohm territory without even breaking a sweat.
The tank is made from stainless steel and pyrex glass and has a small Delrin disk at the bottom. This ensures that heat from the tank does not reach the Mod. It has a diameter of approx. 23mm and a length of approx. 47mm.
Liquid and AFC:
The NRG tank is filled from the top which is by far the best and easiest way to fill your tank.
Find the arrow at the top of the tank and push the top until you see the fill hole in the white insulator piece.
The tank tube is made from strong pyrex glass, so there is no risk of ruining the tank by using the wrong liquid.
It will hold approx.2 ml of e-juice.
The airflow is appropriately massive for a muscle tank like this, a can be adjusted to your preference. You will get a surprisingly smooth pull from the two large air holes at the bottom of the tank.
The drip tip is a wide bore and made from Delrin to avoid heat on your lips.
It has a spit-back protection which is quite useful when vaping at high Watt's.
Note: You cannot use a standard 510 drip tip on this tank!
The replaceable coils for the NRG tank is both strong a capable and will give you a really good performance.
The NRG GT 4 coil features a dual vertical wire set-up and has an Ohm of 0.15 Ohm.
The vertical wire design allows for huge juice holes that will ensure a fantastic taste as well as a massive vapour production.
It will perform best between 45 - 60 Watts. (30-70W).
The NRG GT 8 coil features a Octa (8) vertical wire set-up and has an Ohm of 0.15 Ohm.
The vertical wire design allows for huge juice holes that will ensure just as good a flavour but an even more over-the-top amount of vapour.
It will perform best between 60 - 80 Watts. (50-110W).
Both coils, obviously, use 100% organic Japanese cotton as wick.
Important: Please ensure that your coil is totally soaked in liquid before you use it. Faliure to do so will result in the cotton in the coil dry-burning and will ruin the coil.
NOTE: The tank shown in the video and on the pictures is not the EU version you get with this Kit.