Eleaf iStick Pico 25 BoksMOD + Ello Kit
  • Eleaf iStick Pico 25 BoksMOD + Ello Kit

Eleaf iStick Pico 25 BoksMOD + Ello Kit

Price: DKK449.00
Tax included
In stock
Eleaf iStick Pico 25 BoksMOD + Ello Kit

Uses one 18650 battery (Not included)

With a nice design, wonderful features and a lot of power, the iStick Pico 25 spoils us with a massive 85W and TC vaping with every possible feature. All at a very reasonable price.
You even get the brilliant Ello tank on top!

  • Variable Wattage: 1 - 85Watt / TC: 100 - 315°C / 200 - 600°F.
  • Modes: VW, Bypass, Nickel, Titanium, Stainless Steel and TCR (M1, M2 and M3).
  • Uses one 18650 flat top battery (sold separately).
  • Updatable Firmware.
  • Comes with the Ello sub ohm tank.

The Eleaf Pico series is known and loved for the amazing combination of compact size, strong performance and features way beyond what the price tag indicates.
This Pico 25 is now wider, stronger and comes with the practical Ello tank with the capacity of 2ml juice.
With a replacable 18650 battery, a massive 85W of power, advanced TC features and updatable Firmware, the iStick Pico 25 is a set not to be missed.

Stick Pico 25 Features:

  • Updatable Firmware.
  • Variable Wattage from 1W - 85W with one 18650 battery.
  • In VW mode: Resistance between 0.1 - 3.5 Ohm.
  • Temperature Control: 100 - 315°C / 200 - 600°F.
  • In TC mode: Resistance between 0.05 -1.5 Ohm.
  • Modes: VW, Bypass, Nickel, Titanium, Stainless Steel and TCR (M1, M2 and M3).
  • Lock your Ohm in TC mode by pressing and holding Fire and Up.
  • Bright 0.91" OLED screen.
  • Stealth-function.
  • 5 click on/off.
  • 2 clicks to enter the menu.
  • 10 clicks to see the temperature of your coil.
  • 20 clicks to read firmware version.
  • Stainless steel springloaded 510 connection.
  • Temprature alarm function.
  • Temperature protection.
  • 10 second cut off protection.
  • Atomiser short circuit protection. The screen will show ''Atomizer short''.
  • Low voltage protection.
  • Low power alert.
  • Micor-USB to us for both charging and updating Firmware.
  • Uses one 18650 flat top battery of minimum 25Amp. Charge externally or in the iStick via the Micro-USB port. 
  • Size: L: 25mm x W: 48mm x H: 70.5mm.

Ello subohm tank features:

  • Made from  stainless steel.
  • Capacity: Aprox. 2 ml.
  • Pyrex glass.
  • Easy Top fill: Push top cap back to access the fill hole.
  • Can be fully disassembled for cleaning.
  • Hidden AFC (Air Flow Control).
  • Two drip tips included -not 510 drip tip compatible.
  • 1 x HW1 0.2Ohm SS316L coil best between 40-80Watts.
  • 1 x HW2 0.3Ohm kanthal dual coil best between 30-70Watts. 
  • Size:  25mm in diameter, height 46 (including 510 connector and drip tip).

Design and operation:

The design of the Pico 25 is new yet unmistakably Pico-recognizable. Nice round lines and fantastic ergonimics.

The Plus and Minus buttons are still on the bottom of the Mod for a clean design and the Firebutton and OLED screen is well placed.
The 25mm diameter allows you to use bigger tanks than the standard 22mm

The iStick Pico 25 uses a single 18650 battery that will let you vape from 1 - 85W. You must use flat top batteries and they should be at least 25Amp.
You change the battery by unscrewing the "top" next to the 510 connection. Remember that the battery goes in plus first.

You turn the iStick Pico 25 on and off by pressing Fire 5 times. When the Pico is off, you can rotate the screen by pressing and holding Plus and Minus.

When the Pico is on, press and hold Fire and Minus to go to Stealth-mode. You can now vape without the screen lighting up.

3 different vape-Modes:

The iStick Pico 25 offers three ways to vape: In normal VW Mode, Temperature Control (TC) Mode and Bypass Mode where it functions like a Mech Mod.
In VW and Bypass mode you can use resistances between 0.1 - 3.5Ohm.

Actually the Pico has 8 Modes. This is because it has 6 different TC Modes: Ni, Ti, SS, M1, M2 and M3.

TC with many options:

The 6 different TC Modes allows you to use different wires for your coils. Basically you can choose between:
Ni (nickel), Ti (titanium), SS (stainless steel).
The last three Modes: M1 M2 and M3 are so called TCR (Temperature Coefficient of Resistance) that allows you to adjust the coefficiant of your wire with absolute precision. So if you feel that the fixed Modes doesn't quite hit the spot, this will allow you to get exactly the settings that are right for your set-up.

You can vape between 100 - 315°C / 200 - 600°F and from 0.05 - 1.5 Ohm, so you have every chance to find the perfect vape for you.
In TC mode you can set your Watts by pressing fire 4 times and now you have the option to change you Watt's.
Remember to lock your Ohm in TC mode as the chip needs a referance to determine the temperature of your coil.
You lock the Ohm by pressing and holding Fire and Up. The Ohm sign on the display will then switch to a padlock.

Update the Firmware:

You can charge the batteries inside the iStick Pico 25  by using the Micro-USB port at the bottom. However, even more important you can update the Firmware of the chip through this port as well. That way you'll always have access to the latest features.

The Ello sub ohm tank:

The Ello tank you get in the set is a very compact tank, made from stainless steel and pyrex glass.

The Ello features easy top-fill:
Find the small mark "Open on the top of the tank. Then push the top cap back and you will then get access to the fill hole.
Reverse the proces to close off the tank.

The Ello coils:

  • HW1 with a resistance of 0.2Ohm. A single coil/2 wire design that will perform best between 40 - 80W.
  • HW2 with a resistance of 0.3 Ohm. A 2-coil design with 2 wires in each coil. Will perform best between 30 - 70W.

The drip is not a standard 510 size. You cannot use 510 tips on the Ello.

The AFC (Air Flow Control) is placed at the bottom of the tank and can be adjusted exactly to your liking, and the tank can be fully dis-assembled for cleaning and maintanence.

The Ellos is a very versatile tank and is the perfect companion for the Pico 25 Mod.


6 Items