Aspire Cleito SubOhm Tank
  • Aspire Cleito SubOhm Tank
  • Aspire Cleito SubOhm Tank
  • Aspire Cleito SubOhm Tank

Aspire Cleito SubOhm Tank

Price: DKK149.00
Tax included
In stock
Anbefalet tilbehør

Aspire Cleito SubOhm Tank

Rethinking not only the tank, but also the very coil structure, the Aspire Cleito subohm tank has truly earned the label "game changing".
Here is what she has to offer.


  • Made from Stainless 304 Steel and pyrex glass.
  • 510 connection.
  • Easy top-fill design.
  • 2 ml juice capacity.
  • Tube made from pyrex glass.
  • Comes with two replacable coils: 0.4 Ohm and 0.2 Ohm.
  • Coils are made from Clapton wire.
  • Wick is made from 100% organic cotton.
  • Quardruple airhole AFC (Air Flow Control) is easily adjusted by twisting the AFC ring.
  • Wide bore drip tip included. You can use any 510 tip as well.
  • Dimensions: Height: 58mm, Diameter: 22mm.

Aspire is thinking way out of the box on this one.
The basic idea of the Cleito is to use specially designed coils that replace the very chimney of the tank itself. Add on top of this a set up of vertical Clapton wires and you have a definite winner.

The coils:

Aspire has focused on re-thinking the airflow of the tank and the coils.
As the coil is also the chimney of the tank you get a tube that leads directly from the coil wire/wick to the mouthpiece. The result is a massive amount of vapour and a taste that will surprise you.

The Cleito comes with two coils of 0.2 and 0.4 Ohm which means that you can find the perfect set up for the tank/Mod combination and get exactly the vape you want.

0.2Ohm for use between 55 Watt and 70 Watt.
0.4Ohm for use between 40 Watt and 60 Watt.

As you might have noticed by now, the Cleito is not a tank for a small and discreet vape. It needs a powerful VW or mechanical Mod to show its potential. If the Mod is geared for it, the Cleito will lead you all the way to subohm heaven.

As always when it comes to Aspire, the coils are very easy to install/mount in the tank.

The Air Flow Control (AFC):

A good airflow is pivital for a SubOhm tank and airflow is much more than just "all open - straight through". It's about designing where the air goes and when it goes there. This might sound simple but as most people know there is a huge difference in airflow from tank to tank.

The Cleito will give a lot of air through the four large holes in the AFC.

The juice-fill:

Filling the Cleito is a walk in the park:
Close the AFC, unscrew the top of the tank and drip your liquid down along the coil. Stop a millimeter or so before the threads, screw the top back on and re-open the AFC...and away you go!
*Remember always to Prime your coil before first use.

The extras:

The Cleito tank comes with a vapeband you can mount on the pyrex tank to protect it from nasty falls and accidents.
You also get four so called "Cuff's" in different colours. The Cuff's are designed to be put on top of the tank, as the top will heat up because of the coil design which leads the heat to the top cap. The Cuff's will solve this problem and at the same time allow you to fashion your tank to match your tie, your Christmas jumper...or even the colour of your pet iguana!

The Cleito comes with a wide bore drip tip. Should you want to use your own favourite 510 tip, simply pull of the top of the delrin tip and put your own in the hole.


3 Items