Aspire Cleito 120 Pro SubOhm Tank
If you are familiar with the Aspire Cleito tank, you will recognize a lot about the Cleito 120 Pro.
In many ways the tanks are alike but make no mistake: The Cleito 120 Pro is "the older brother" that is designed for vaping at very high Watts!
- Material: Stainless Steel and pyrex glass.
- 2 ml juice capacity.
- Easy top side fill.
- Size: 25mm x 52mm.
The Cleito 120 Pro is a Subohm tank that can produce a lot of vapor and a fabulous flavour full vapor, it all depends on what coil you choose.
In other words: This is a genuine extreme-vaping with flavour in mind Subohm tank in many ways.
- Made from Stainless Steel and pyrex glass.
- 510 connection.
- Pyrex glass tank.
- The capacity of the tank is approx. 2ml of e-liquid.
- Top-fill: Find the 3 small dots at the top of the glass. Pull up the top cap to get access to the fill-hole.
- Wide-bore drip tip / not 510 compatible.
- AFC (Air Flow Control) with 3 large, fully adjustable slots.
- Dimensions: 25mm x 52mm.
The Cleito 120 Pro is a design based on the Cleito Pro tank.
It has a diameter of 25mm, and is 52mm tall, so a little smaller than the Cleito Pro tank, and included is a coil made for vaping on very high Watts, and one for enhanced flavour.
The basic design is still the same, the coil is also the chimney of the tank.
The coils you get with the tank is similar to the coils for the other Cleito tanks: the coil is also the chimney of the tank you get a tube that leads directly from the coil wire/wick to the mouthpiece. The result is a massive amount of vapour and a taste that will surprise you.
The Cleito 120 Pro tank comes with two coils:
1 x 0.16 Ohm that will perform best between 100 and 120Watts, this coil is for huge vapor production.
1 x 0.15 Ohm that will perform best between 60 and 75Watts, in this coil Aspire have used Mesh instead of the round wire we are used to as heating element, the Mesh will enhance the flavour to make your vape experience outstanding.
Both coils have three large juice holes to make sure the wicks are always fully saturated with liquid, and the cotton used is 100% organic Japanese cotton.
The Air Flow Control (AFC):
A good airflow is pivotal for a Subohm tank and airflow is much more than just "all open - straight through", it's about designing where the air goes and when it goes there. This might sound simple but as most people know there is a huge difference in airflow from tank to tank.
The Cleito 120 Pro will give a massive amount of air through the three large holes in the AFC.
Filling the Cleito is a walk in the park:
The tank is filled from the top/side. Find the 3 small dots above the glass. Pull up the top cap to access the fill-hole. Reversen the process to Close the tank.
The tank Will hold approx. 2ml of e-liquid. The tank can be fully disassembled for cleaning.