Aspire Tigon Starter Kit
Aspire presents its Tigon kit at a time when the field of good starter kits are as big as it has ever been.
So why should you keep an eye out for this particular set?
With a tank that that is child proof, can hold 2ml e-liquid, innovative coil change system, a battery of 1800 mAh with a fast-charge option (by use of a 2 Amp charger) and really easy to operate, this is a kit that is perfect for anyone who wants vaping in the easiest possible way.
- 1800mAh battery.
- Volt output from 3.3V - 4.2V.
- Tank capacity: 2ml.
- Child proof tank.
- Diameter 22mm, total length 123mm.
The Aspire Tigon is a very versatile kit, and is for the one that is just starting and the experienced vapers that just want a new perfect kit.
- Made of stainless steel.
- 18000mAh battery.
- Volt output: 3.3V - 4.2V.
- Spring-loaded 510 connection.
- Charging via the Micro-USB port.
- 5 click on/off.
- 10 second cut off.
- Low Volt warning: LED will flash.
- Low Volt protection: At 3.3V the battery shuts down and blink 15 times.
- LED displays battery level:
- 4.2-3.8V Pink.
- 3.8-3.5V Blue.
- 3.5-3.3 Red - time for a charge.
- Atomizer short protection.
- Overcharge protection.
- Made of Stainless Steel.
- Liquid capacity 2.
- Easy top-fill.
- Child proof.
- AFC (Air Flow Control) adjustment.
- 510 drip tip compatible.
- 2 replaceable Tigon coils included:
- 0.4 and 1.2 Ohm coil.
- NiChrome wire in a vertical set-up.
- 100% organic cotton wick.
- Diameter 22mm, length 61mm. (Including drip tip)
The Aspire Tigon kit is certainly "good vaping in a handful".
The keywords for this vaper are:
2ml juice capacity.
Long battery life.
Easy to use.
The battery of 1800 mAh can be charged with a 2 Amp charger via the Micro-USB port. This makes this a "stick" you can bring along everywhere to get perfect vaping pleasure wherever you are.
The battery has 5 click on/off and you can go as low as 0.4 Ohm.
It has all the necessary safety features like short circuit protection, over charge protection and low Volt protection (at 3.3V the battery shuts down and blink 15 times).
The Aspire Tigon battery functions similar to a mechanical Mod.
When fully charged it will deliver 4.2 Volt and then slowly drop as you use it.
The battery has a diameter of 22mm, a total length of 79mm is made from stainless steel and has a spring loaded 510 connection.
To re-fill the tank, simply find the small drop on the top cap and pull it up and then push it back in order to open the fill hole. when the tank is filled push the top cap back in place, and push down on it...and you're ready to vape on.
The fill hole sealing is a self-closing design, and is a part of the Child proof design.
The tank is 510 drip tip compatible and you get a Delrin wide bore drip tip and a drip tip that is to be used when vaping MTL.
The AFC is quite unique, and have 2 options turn it one way and you have the option to have it fully open, but turn it the other way and you get 5 small holes so you can fine tune the air flow to the coil you use.
The Tigon kit comes with 2 coils:
1 x 0.4Ohm designed for direct lung (DL) where you can get more air flow through the coil.
1 x 1.2Ohm designed for mouth to lung (MTL) where the draw is much tighter and is more like the way a draw is from a cigarette.
Begge coils er med NiChrome wire i et vertikalt setup, og der er brugt 100% organisk vat som væge materiale for at sikre et godt væske flow.
Both coils feature a single vertical coil design with NiChrome wire and a 100% organic cotton Wick.
A nice feature on the Aspire Tigon tank, is that you just unscrew the base, then pull out the old coil, replace it with a new one. As the coil are hold in place by 2 O-rings.
The Tigon tank can still hold e-liquid when you change the coil, because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut, and there by sealing the holes when the coil is removed.