Asmodus X Ultroner Pumper-18 Squonker MOD (Steel / Red)
Uses 1 x 18650 (Battery not included)
If you are looking for a unique squonk mod, then take a look at Pumper 18 from Asmodus, Pumper is an unregulated mod with a built in chip for protection and is made of Stabilized Wood and Stainless Steel, it has an innovative pump function on the squonk bottle.
- Unregulated Squonk mod.
- Max output 80Watt.
- Can go as low as 0.1 Ohm.
- Siphon squonk bottle with pump function.
With the Pumper 18 you will get a mod with an appearance that no one else has as you can’t find two identical pieces of wood, the mod you will get have the same basic colour, and with this the colour is Red.
Please remember that the pictures used is only to show how your mod can look like, the mod you receive can look completely different.
- Because of the Stabilized Wood, every mod will be unique and the pictures in this product is only to show you how the mod can look like.
- Uses 1 x 18650 battery. (Battery not included)
- Unregulated mod, but with a chip inside.
- Volt: 4.2 to 3.3V.
- Maximum wattage is 80Watts.
- Can run coils as low as 0.1 Ohm.
- Siphon squonk bottle with pump action.
- 8ml Siphon squonk bottle.
- Fire button on the side.
- 5 klicks On/Off.
- 10 second cutoff.
- LED light indicates:
- Low Battery level: Flashes Red 5 times.
- Correct battery orientation: Flashes Green.
- Atomizer short: Flashes Red.
- Size: 26mm x 47mm x 84mm.
Design and function:
Asmodus are making some very beautiful mods, and Pumper 18 is no exception. The materials used are Stainless Steel to make the top and bottom part and unique stabilized wood for the body of the mod.
Pumper 18 is an unregulated mod and then again not 100% as it has a chip inside for protection, because of the chip you are limited to an output of 80Watts, you can go as low as 0.1Ohm. As all unregulated mods you will get the power that the battery have, meaning that from start 4.2Volts and then it drops in voltage when you use it. So you have to make your coils to the specs of the mod to get a vape that is perfect for you.
You turn Pumper 18 On and Off with 5 fast klicks on the fire button.
On the side of Pumper 18 you will see a small LED that indicates:
Low Battery level: Flashes Red 5 times.
Correct battery orientation: Flashes Green.
Atomizer short: Flashes Red.
Battery / Squonk bottle:
You need a single 18650 batteries to power Pumper 18, to put a battery inside you need to unscrew the battery lid, drop the battery inside and screw the lid on again, the LED will flash to show that the battery has the correct orientation. You do not have the option to charge the battery inside Pumper 18, but you need to charge it in an external charger.
Siphon squonk bottle for Pumper 18 is not like other squonk bottles you might know, you do not squeeze the bottle but use the lever to pump the liquid to your RDA, this clever system makes every pump deliver the exact same amount of liquid. The tank part of the bottle is made of Polycarbonate and have a frosted appearance but on the front you see a clear "window" that is made for you to better see the liquid and to show you where to stop when filling it, do not go over the clear "window" with liquid when filling the Siphon bottle as there need to be room for the pumping system and tube inside the bottle.
The Siphon bottle have a capacity of approx. 8ml liquid, there are no way of taking it apart, so to clean it use hot water and let it air dry, if you try using a towel and push the O-rings out that seals it they are a not easy to mount again.