Wismec Reuleaux RX GEN3 Dual 230W TC BoxMOD
  • Wismec Reuleaux RX GEN3 Dual 230W TC BoxMOD
  • Wismec Reuleaux RX GEN3 Dual 230W TC BoxMOD
  • Wismec Reuleaux RX GEN3 Dual 230W TC BoxMOD
  • Wismec Reuleaux RX GEN3 Dual 230W TC BoxMOD
  • Wismec Reuleaux RX GEN3 Dual 230W TC BoxMOD
  • Wismec Reuleaux RX GEN3 Dual 230W TC BoxMOD
  • Wismec Reuleaux RX GEN3 Dual 230W TC BoxMOD

Wismec - Reuleaux RX GEN3 Dual 230W TC Box MOD

Price: DKK429.00
Tax included
Colour
There are not enough products in stock

Wismec Reuleaux RX GEN3 Dual 230W Mod

Uses 2x18650 (Batteries not included)

You probably know the Reuleaux series by Wismec.
This is Generation 3 version called the Reuleaux RX Gen3 Dual.
with this Gen3 you will get a smaller Mod.

  • Ergonomic design.
  • Upgradable firmware via Micro-USB.
  • Variable Watt from 1W - 230W.
  • Large 1.3" OLED screen.
  • Use atomizers of:
  • 0.05 Ohm - 1.5 Ohm in Temperature mode.
  • 0.10 Ohm - 3.5 Ohm in Wattage mode.
  • Uses two 18650 batteries. Batteries must be flat top and it is suggested to use batteries with a minimum of 25 Amp. (Batteries not included)
  • Size - H: 74mm, W: 40 mm, L: 34mm.

Wismec and the designer Jay Bo has expanded the popular Reuleaux series with this RX Gen3 Dual. It has an ergonomic design.
The chip is a tried and tested chip, that provides many options and possibilities.

Features:

  • Solid steel construction.
  • Gold plated springloaded 510 center pole.
  • 1.3" OLED display showing: Ohm, Volt/Watt/Temperature and battery level etc.
  • Variable Watt from 1W - 230W.
  • Use atomizers of:
  • 0.05 Ohm - 1.5 Ohm in Temperature mode.
  • 0.10 Ohm - 3.5 Ohm in Wattage mode.
  • Temperature Control using Ni200, Titanium and Stainless Steel wire/coils.
  • Temperature: 100°-300°C (200°-600°F).
  • Uses two 18650 batteries with a minimum of 25 Amp.
  • We recommend that you charge the batteries in an external charger.
  • Firmware update via Micro-USB.
  • Max Volt output: 9Volt
  • Max Amp output: 50Amp.
  • 10-second cut-off.
  • 5 click on/off.
  • Lock the Wattage: Hold "Up" and "Down" buttons.
  • Three clicks on Fire and press "Up" switch between Watt, TC-Ni, TC-Ti, TC-SS and TCRM1/M2/M3 (TCR memory slots.
  • Adjust the Wattage in TC mode: Press Fire three times and press "Down". When the W flashes, you can adjust the Wattage.
  • Lock the Ohm in TC mode by pressing Fire 3 times and "Down" until the Ohm-sign flashes. The press "Up" and a padlock will show on the screen.
  • Low Ohm protection.
  • Un-even battery discharge protection.
  • Reverse battery protection.
  • Electronics overheat protection.
  • Size - H: 74mm, W: 40 mm, L: 34mm.

The Mod:

The design is "kind of a triangle" and is ergonomic.

1.3" OLED screen, well-placed buttons, upgradable Firmware, many features and the dual 18650 battery setup.

The RX Gen3 Dual has a spring-loaded 510 centre pole that will ensure that most tanks will fit flush on your box.

The Fire button and "Up/Down" keys are well placed and the bright 1.3" OLED screen will tell you all you need to know.
It's up to you if you want a traditional battery indicator or prefer to get the info shown as percentages.
You can also choose to have your Amp showing or what about a puff-counter that will let you track your vaping-habits during the day.

The Reuleaux RX Gen3 Dual has every safety feature available today.
Reverse battery protection, uneven battery discharge protection, short circuit protection, low resistance protection and temperature protection.

Temperature Control:

The RX Gen3 Dual will take you all the way up to 230W in Wattage mode but it is equally for Temperature Controlled (TC) vaping.

It has designated settings for Nickel, Titanium or Stainless Steel wire/coils and you switch between the modes by pressing Fire 3 times rapidly. This will take you through Watt, TC-Ni, TC-Ti, TC-SS and TCR1-M1/M2/M3 mode.
TCR (Temperature coefficient of resistance) is a description of how much the resistance (Ohm) of the wire rises when heated.
TCR values for different types of wire to further improve the accuracy of the Mod’s ability to limit and sense an atomizer coil’s temperature.

When vaping in TC mode it is pivotal to lock your Ohm. This has to be done at room temperature and is done by pressing "Fire" and "Up" simultaneously. This will bring up a small padlock icon on the screen thus showing that you are good to go on TC-vaping.
Remember to re-lock the Ohm every time you change your coil or tank.

The current Watt or TC setting can be locked by pressing "Up" and "Down" simultaneously.

Updatable Firmware etc.:

The firmware on the RX Gen3 Dual can be updated via the Micro-USB cable provided.

The batteries:

You need 2 x 18650 batteries to power RX Gen3 Dual, remember to place the batteries correctly according to the directions printed on the inside of the battery compartment.

The battery lid is a new design to what we have seen before with past Reuleaux mods, with RX Gen3 Dual you just push the battery lid out and up, reverse the procedure to close it, this way it is easy to change the batteries.

You can, of course, use the RX Gen3 Dual for vaping on low Watts (this will give you a long vape-time (and you can use batteries with a lower Amp rating), but if you want to use it on high Watts it is important that you
Get two new, strong batteries (minimum 25 Amp)
Make sure they are identical (same brand, same mAh and Amp limit).
Only to use them together and at the same time.
Charge them together and for the same amount of time.
The batteries have to be Flat Top.

We recommend that you charge the batteries in an external charger and NOT inside the mod, to ensure a correct charge.

Wismec
15021