Tesla WYE II 215W TC BoxMOD
  • Tesla WYE II 215W TC BoxMOD
  • Tesla WYE II 215W TC BoxMOD
  • Tesla WYE II 215W TC BoxMOD
  • Tesla WYE II 215W TC BoxMOD

Tesla - WYE II 215W TC Box MOD

Price: DKK489.00
Tax included
Colour
There are not enough products in stock

Tesla WYE II 215W TC BoxMOD

Uses 2x18650 batteries, batteries NOT included!

The WYE II 215W is light weight and durable as the box is primarily made of ABS and PC plastic.

  • Ultra-light weight.
  • Variable Wattage from 7 - 215W.
  • Temperature control: 100° C - 315° C / 200° F - 600° F.
  • Uses 2x18650 batteries. (minimum 30 Amp-sold separately)
  • Size: 86mm x 56mm x 30mm.

Features:

  • Quality construction from ABS and PC plastic.
  • Stainless Steel 510 connector, with a spring loaded centre pole.
  • Can fit up to 26mm diameter atomizers.
  • Large and bright 0.96" OLED screen.
  • Adjustable power using Wattage or Fahrenheit/Celsius.
  • Variable Wattage from 7 - 215W.
  • From 0.1 - 3.0 Ohm in power mode.
  • Temperature control: 100° C - 315° C / 200° F - 600° F.
  • From 0.05 - 1.0 Ohm when used in Temp Control
  • In TC mode you can use: Titanium, Ni200, SS or TCR (set the coefficient) wires.
  • 5 click On.
  • 5 clicks to lock/on lock.
  • 3 clicks on Fire to change settings/mode.
  • 10 second cut off.
  • Short circuit protection.
  • Low resistance/Ohm protection.
  • Low Voltage protection.
  • Overheating protection.
  • Uses 2x18650 batteries. (minimum 30 Amp-sold separately)
  • Micro USB port for charging the batteries.
  • Size: 86mm x 56mm x 30mm.

WYE II:

Tesla presents us with the WYE II mod, it is primarily made of ABS and PC plastic to keep it light-weight, the ABS and PC plastic make it very durable as ABS and PC is a very strong plastic material.
On top you will find a centred Stainless Steel 510 connector with a spring-loaded centre pole that will ensure that most tanks will sit flush to the box. You can use tanks up to 26mm in diameter on the WYE II mod.

The WYE II is ergonomically designed and have a well-placed fire button and adjustment buttons.

The menu is easy to navigate; you press fire 3 times to enter the system. When pressing fire 3 times a setting on the screen is highlighted if you want to adjust something else just press the adjustment buttons, and fire to enter it.

Different modes:

The WYE II has many features, here is an explanation on what they are:

KA/KANT (Variable Wattage) for "normal vaping" using variable wattage.
TI (Variable Temp Titanium) allows for the use of titanium wire, for temperature controlled vaping.
Ni200 (Variable Temp Nickel) allows you to use nickel wire, for temperature controlled vaping.
SS/SS316 (Variable Temp Stainless 316 Steel) allows you to use stainless 316 steel, for temperature controlled vaping.
TCR (Variable Temp where you set the wire coefficient yourself) allows you to use other types of wire for vaping.
M (Memory mode) allows you to have 3 different settings configured, and easily change to the preferred one.

Remember to lock the resistance on the coil before using temperature control, as the chipset needs a reference Ohm to calculate the temperature of the coil, this is done when the coil i at room temperature, to lock it press fire 3 times jump to the Ohm symbol and press fire, then change it to locked, you will see a padlock instead of the Ohm symbol and you are now ready to enjoy TC vaping.

Battery:

The WYE II uses two 18650 batteries that you can easily replace by removing the back panel from the mod.

The batteries can be charged in the box itself, by using the Micro-USB port, but it is strongly recommended that you always charge your batteries in an external charger when it is possible.
Batteries are not included.

IMPORTANT: It is pivotal that you get two new batteries that are 100% identical (same brand, same mAh and same Amp) and that you use them together and for the same amount of time, if you want to use the two-battery configuration. The batteries must be charged simultaneously and for the same amount of time.

Tesla
19342
0 Item