Smok G-Priv Baby Touch Screen MOD - Luxe Edition
  • Smok G-Priv Baby Touch Screen MOD - Luxe Edition
  • Smok G-Priv Baby Touch Screen MOD - Luxe Edition
  • Smok G-Priv Baby Touch Screen MOD - Luxe Edition

Smoktech - G-PRIV Baby Touch Screen MOD Luxe Edition

Price: DKK535.00
Tax included
There are not enough products in stock

G-Priv Baby Touch Screen MOD Luxe Edition

Uses 1x18650 battery. (Not included)

Smoktech's G-Priv Baby 85Watt TC provides 1 - 85W, temperature control, optimisation of the performance to the resistance of more or less any wire/coil, and a 2" TFT touchscreen on the side of the Mod.

The G-Priv Baby only has two physical buttons. The rest is controlled from the screen. It's just as you know it from your smartphone or tablet.

  • Large and bright 2" TFT touchscreen.
  • 1-85 Watt / TC: 100°-315°C (200°-600°F)
  • Choose from Kanthal, Nickel, Titanium or Stainless Steel-mode.
  • Uses one 18650 flat top battery of at least 25Amp. (Sold separately)
  • Size: 72mm x 51mm x 29.2mm.

All settings and controls are handled by the touchscreen except for the Fire button and a small lock/unlock button.

The Fire button is the side fire button you know from a lot of other mods from Smok.

The menu on the screen is easy to operate and the one 18650 batteries will give you a long vape-times.


  • Quality construction from Steel and Stainless Steel.
  • Spring-loaded gold plated 510 connection.
  • Large and bright 2" TFT touchscreen.
  • Uses one 18650 flat top batteries (not included). Smok recommends 25Amp or more.
  • Micro-USB port used for charging batteries in the Mod and for updating the Firmware.
  • Min/max Ohm with use of normal kanthal coil from 0.1 - 2.5 Ohm.
  • Min/max Ohm with use of Ni200 (Nickel), Ti (Titanium) or SS (Stainless Steel) coil "Temperature Control” from 0.05 - 2.0 Ohm.
  • Variable Wattage from 1W - 85W.
  • Power adjustment in Watt or Fahrenheit/Celsius mode.
  • Temperature: 100°C - 315°C / 200°F - 600°F.
  • Adjust the heat co-efficient of your coil wire for maximum control of your vape.
  • 5 click On/Off.
  • 3 click to lock the Mod.
  • Press the small button above the Fire button to turn the screen On and Off and hold the button to lock the screen/your settings.
  • All adjustments are done via the touchscreen.
  • Reversed pole protection.
  • Short circuit protection.
  • Low resistance/ohm protection.
  • High/Low Voltage protection.
  • Overheating protection.
  • Size: 72mm x 51mm x 29.2mm.

The G-Priv Baby Mod:

The only physical button, except for the Fire button, is the small one just on top of Fire. This is used for turning the screen on and off (by a click) and to lock your settings (by pressing and holding it).

The large 2" TFT touchscreen on the side of the Mod works exactly the same way as your smartphone: Everything is controlled and adjusted by pressing the screen. At the same time the screen gives you all relevant information about your vape like:

Battery status for each individual battery.
How hot your coil is.
A puff-counter that will help you keep track of your vaping habits.

The G-Priv Baby will go from 1 - 85W in normal power mode. This allows you to use resistances between 0.1 - 2.5 Ohm.

You can also choose to let loose in Temperature Control (TC) mode and can then set the heat of your coil/wire between 100°-315°C (200°-600°F) and vape away between 0.05 - 2.0 Ohm.
You set the Wattage from the menu when you choose which wire type you use.
The Mod will also lock your Ohm.
This will happen when you have set the mode according to your wire, mounted a tank and pressed Fire. It will ask if it is a new coil, and if you confirm this, the Ohm will be locked.

You can set the TCR (Temperature Co-efficient of Resistance) and thereby adjust your vaping-setting with millimetre precision according to your wire.

TCR (Temperature coefficient of resistance) is a description of how much the resistance (Ohm) of the wire rises when heated.
TCR values for different types of wire to further improve on the accuracy of the Mod’s ability to limit and sense an atomizer coil’s temperature.

The G-Priv Baby has 5 power modes in both Wattage and TC mode: Max, Hard, Min, Soft and Norm.

It is made from steel and Stainless Steel and has a gold plated 510 connection pole that is spring loaded and ensures that the tank sits flush on the box.

Battery and Firmware:

At the bottom of the Mod you'll find a Micro-USB port that is used to charge the battery and for updating the Firmware of the chip.
This ensures that you'll always have access to the latest features and functions.

The G-Priv Baby uses one 18650 flat top batteries. Smok recommends that you use a 25 Amp battery or stronger.

Note: Smok points out the importance of choosing POWER OFF from the menu when you need to change the batteries in the Mod.
Failure to do so can result in so-called Abnormal Shut-Down that will delete all your settings and data.
Therefore: Always choose Power Off from the menu before changing batteries.

The Menu:

The menu in the G-Priv Baby is quite simple and easy to understand, however it is a good idea to read the user manual thoroughly.
What you need to know from the get-go is that you enter the menu by pressing the ”<" symbol at the left hand side of the screen. Then you can navigate and adjust on the TFT screen.

On top of this the G-Priv Baby has all the safety features you could ever wish for.