Smoant Naboo 225W TC BoxMOD
  • Smoant Naboo 225W TC BoxMOD
  • Smoant Naboo 225W TC BoxMOD
  • Smoant Naboo 225W TC BoxMOD
  • Smoant Naboo 225W TC BoxMOD
  • Smoant Naboo 225W TC BoxMOD

Smoant - Smoant Naboo 225W TC Box MOD

Price: DKK579.00
Tax included
Colour
There are not enough products in stock

Smoant Naboo 225W TC BoxMOD

Uses 2x18650 batteries. (batteries not included)

As the name implies you get 225W of power at your fingertips besides advanced features like Temperature Control (TC) etc.
On top of that Naboo have a large 2.4" HD TFT colour screen, that gives you all the information needed about your vape.

  • 2.4" HD TFT Color screen.
  • Variable Wattage from 1W - 225W, in 1 Watt increments.
  • Temperature control: 100° - 300°C / 200° - 600°F.
  • Can take atomizere up to 27.5mm in diameter.
  • Dual 18650 battery setup. (Batteries not included)
  • Size: 31mm x 48mm x 91mm.

Features:

  • 2.4" HD TFT Color screen.
  • Material: Stainless Steel and Steel.
  • Self-adjusting Stainless Steel 510 connection.
  • Variable Wattage: 1-225W.
  • Temperature Control: 100° - 300°C / 200° - 600°F in 10° increments.
  • Resistance in Watt mode: 0.1 - 3.0 Ohm.
  • Resistance in TC mode: 0.05 - 3.0 Ohm.
  • 5 click On/Off function.
  • 3 click on fire to enter the menu.
  • Adjustments buttons are touch buttons.
  • Click the small button under the fire button to activate/deactivate the adjustment buttons.
  • Long press the small button to enter/exit Stealth Mode.
  • 10 second cut off.
  • High temperature protection.
  • Atomizer short circuit protection.
  • Low Voltage battery protection.
  • Uses two 18650 batteries of at least 30 Amp. (Sold separately).
  • Battery lid with 3 strong magnets.
  • Micro-USB port used for charging batteries in the Mod and for updating the Firmware.
  • Size: 31mm x 48mm x 91mm.

The Naboo 225W:

The Mod has a centred Stainless Steel 510 connector with a spring loaded 510 pin that will ensure that almost any tank will sit flush on the Mod. Naboo lets you use atomizers with a diameter of 27.5mm without any overhang.

The large 2.4" HD TFT Color screen will keep you informed about everything about your vape.

Underneath the screen you will find the adjustment buttons, they are not real buttons but touch buttons. Naboo have a vibration module inside that will be activated every time you use the touch buttons, but you have the option to activate/deactivate them from the menu.

The size of 91mm, 48mm and 31mm is surprisingly compact given the dual 18650 set-up and the 2.4" screen.

What you need to know about operating Naboo 225W mod: 5 clicks on fire to turn the mod On/Off, 3 clicks on fire to enter the menu. Under the fire button you have a small button that have 2 functions, long press to activate or deactivate stealth mode, and short press to activate or deactivate the 2 adjustment touch buttons.

Watt or Temperature:

The Naboo 225W can be used in Wattage or Temperature Control (TC) mode.
When using Watt mode, you can go from 1 - 225W, and as low as 0.1 Ohms, but you can obviously use it for any kind of vaping, even if you prefer "a civilized vape" on lower Watts and higher Ohms.

In TC mode you can use Nickel Ni200, Titanium or Stainless Steel coils in the range 100° - 300°C / 200° - 600°F.
You can adjust the Watts in TC Mode, press fire and (Up) buttons at the same time and the Wattage will be highlighted.

The Naboo 225W has 3 power modes: Min, Norm and Hard.
This allow you to set the power for the first 1.5 second when you press Fire.
After that the power returns to the regular Watt setting.

You can set the TCR (Temperature Co-efficient of Resistance) and thereby adjust your vaping-setting with millimetre precision according to your wire.

TCR (Temperature coefficient of resistance) is a description of how much the resistance (Ohm) of the wire rises when heated.
TCR values for different types of wire to further improve on the accuracy of the Mod’s ability to limit and sense an atomizer coil’s temperature.

The Naboo 225W have all the safety features you need for vaping safe at all times and at all Watts.

Batteries and charging/update Firmware:

You need two 18650 batteries (minimum 30 Amp) in the Naboo 225W. (Batteries sold separately).
The battery lid is kept in place by 3 strong magnets so it is easy to change the batteries.
You can charge the batteries in the Mod but we always recommend to charge the batteries in an external charger.

The Micro-USB port is also used for updating the Firmware.

Note: When using a Mod with multiple batteries you should always buy identical batteries (same brand, same mAh, same Amp) and always use them and charge them together and for the same period of time.

Smoant
19756