Innokin Endura T18II 2ml Starter Kit
  • Innokin Endura T18II 2ml Starter Kit

Innokin - 1300mah Endura T18II 2ml Vape Pen

Price: DKK309.00
Tax included
Colour
In stock

1300mAh Endura T18II 2ml Vape Pen

Whether you are a smoker who wants to try out vaping for the first time or a seasoned vaper, the Innokin Endura E18II is for you.

  • Built-in 1300mAh battery.
  • 3 wattage options: 10.5, 12, 13.5Watt.
  • Tank will hold 2 ml of e-juice.
  • Easy top-fill.
  • Size: diameter: 18mm height: 145mm.

The Endura T18II has a 1300mAh battery, 3 wattage options and a 2 ml tank with easy top-fill.

Battery features:

  • Made from stainless steel.
  • Volt output: 4V - 4.5V.
  • Wattage options: 10.5W, 12W, 13.5W.
  • When the battery is off, hold fire to change Wattage option.
  • Max. 3.9Amp output.
  • 510 atomizer/tank connection.
  • AFC ring placed at the top of the battery.
  • 3 click on/off.
  • Built-in 1300mAh battery.
  • 15 second cut off (if the Fire button is pressed for 15 seconds it will turn off the battery until re-pressed).
  • Low voltage warning.
  • Short circuit function.
  • Battery display function
  • 3 LED on fully charged.
  • 2 LED on half charged.
  • 1 LED charge the battery.
  • Size: Diameter 18mm, length 96mm.

Tank Features:

  • Made from stainless steel and Pyrex glass.
  • Air coming through the 510 connector.
  • 510 drip tip included.
  • Replaceable 1.5 Ohm coil, function best on 13.5Watt.
  • Capacity: 2 ml.
  • Easy top-fill.
  • Large windows let you check the juice level.
  • Size: Diameter 18mm, Height 43.5mm.

The Innokin Endura T18II kit is a complete kit that is easy to use. It has all the safety features you'll need and even the possibility to change between 3 watt settings.

The battery:

Innokin have made it possible for you to change the wattage output, the Endura T18II gives you 3 watt options: 10.5W, 12W and 13.5W. To change between the 3 options, turn the battery off (3 clicks on fire) when the battery is off hold fire and the LED will change, when the one to the left is on it is set to 10.5W, middle 12W and the one to the right means 13.5W.
The Micro-USB port is used for charging via your computer or a wall plug (wall adapter sold separately here) is hidden behind a small cap at the bottom of the battery.

You turn the Endura on and off with 3 clicks on the fire button and 3 LED lights will let you keep track of the battery level.

On the top of the battery you will find a 510 connection with a gold plated pole to ensure maximum conductivity. When looking at the top of the battery you see that it has an AFC built in, that is for the wonderful Endura T18II tank, the AFC is designed with 4 holes and can be adjusted as you please.

The tank:

When you want to fill the tank, simply unscrew the top cap with the drip tip and pour e-liquid down the sides of the glass (not in the centre tube!).
Then simply screw the top back on and you're good to go.
Innokin have provided a magnetic cap for the drip tip, when this is mounted it will ensure that your drip tip remain clean, and when vaping you can place it at the bottom of the battery, a clever idea then you will not lose it.

Inside the tank you'll find the coil that heats up the e-juice and turns it into vapour.
The Endura E18TII comes with two 1.5 Ohm coil that will give you a splendid vape. The coils have a 100% organic cotton coil that will ensure a very clear flavour from your e-juice.
When it is time to change the coil simply unscrew the bottom of the tank and take it out. Then insert a fresh coil (make sure it fits in the two slots) and leave the new coil in a full tank of juice for 15 minutes before use. That way you ensure that the wick is fully saturated. These coils will work best with 50 VG/50 PG eLiquid, it may work with 60 VG/40 PG but not with a higher VG/PG ratio.

Innokin
18484
57 Items