iJoy EXO PD270 207W 20700 TC BoxMOD
  • iJoy EXO PD270 207W 20700 TC BoxMOD
  • iJoy EXO PD270 207W 20700 TC BoxMOD
  • iJoy EXO PD270 207W 20700 TC BoxMOD
  • iJoy EXO PD270 207W 20700 TC BoxMOD
  • iJoy EXO PD270 207W 20700 TC BoxMOD

IJOY - EXO PD270 207W 20700 TC MOD

Price: DKK589.00
Tax included
Colour
Last items in stock

iJoy EXO PD270 207W 20700 TC MOD

Use 2x20700/18650 batteries. (Not included)

iJoy presents the EXO PD270, EXO have the classic BoxMOD look that you would know if you have been vaping with power mods (+100Wats) some years ago, at that time every mod with high wattage output had this design. EXO use 2x20700/18650 batteries and can deliver 207Watts, it features different output modes such as Power mode, TC mode (Ni, Ti and SS) and TCR mode.

  • Power: 5-207 Watt / TC: 100°-315°C (200°-600°F)
  • Uses 2x20700/18650 batteries. (Not included)
  • Can take tanks with a diameter up to 25mm.
  • Size: 98mm x 58mm x 25mm.

The EXO will take you all the way from 5 to 207W and let you choose between Watt or TC (Temperature Control) vaping.

Features:

  • Materials: Steel, stainless steel and carbon wrap on the sides.
  • 510 connection with spring-loaded, gold plated pole.
  • Wattage: From 5.0 to 207W (according to iJoy).
  • TC (Temperature Control): 100°-315°C (200°-600°F)
  • Press and hold Up and Down to lock Ohm in TC mode.
  • Will work with resistances between: 0.05 - 3.0 Ohm.
  • 10 second cut-off.
  • 5 click on/off.
  • 3 click to access the menu.
  • Use Up and Down keys to navigate the menu.
  • 0.96" OLED display: Ohm, Volt, Watt and battery level.
  • High/Low Ohm protection.
  • Short circuit protection.
  • Overheat protection.
  • Reverse battery protection.
  • Uses two 20700 batteries or 18650 batteries. (Not included)
  • Charge batteries in the Mod and upgrade firmware via Micro-USB.
  • Size: 98mm x 58mm x 25mm.

The iJoy EXO PD270:

The iJoy EXO PD270 (P = Performance, D = Dual batteries, 270 = 20700 batteries) is a box constructed in Steel.

The large Fire button is placed on the front and below is the large 0.96" OLED screen.
Below the screen is the Up and Down adjustment buttons and the Micro-USB port. The port can be used for both updating the Firmware of the chip in the Mod and for charging the battery inside the Mod.

On the top of the box you will find a Gold-plated, Spring-loaded 510 connection. You can use tanks up to 25mm in diameter without any overhang.

Watt and TC Mode:

The iJoy EXO PD270 will allow you to go from 5 to 207W in regular power mode. This will let you use resistances between 0.05 - 3.0 Ohm.

You can also vape using Temperature Control (TC).
In TC mode you can set the temperature of your wire between 150°-315°C (300°-600°F) and can be used for vaping between 0.05 - 3.0 Ohm.
You can choose between Nickel, Titanium or Stainless Steel-mode use the two memory slots (M1 and M2) to set the TCR of your wire.
Remember to lock the Ohm in TC mode: Press and hold Up and Down adjustment buttons.

To set the temperature:
Press Down-key. The Celsius or Fahrenheit light will flash and you can them set them as you like.
To adjust the Wattage:
Press and hold the Up-key and the W will flash.

TCR (Temperature coefficient of resistance) is a description of how much the resistance (Ohm) of the wire rises when heated.
TCR values for different types of wire to further improve on the accuracy of the Mod’s ability to limit and sense an atomizer coil’s temperature.

4 Power modes:

You get 4 power modes in both Watt and TC Mode: Hard, Min, Soft and User.
This is especially handy in TC Mode. In Hard mode the Mod will give a boost at the start of your vape, in Min mode it will start lower than the Wattage you have set and the jump up to the set Wattage.
The User-setting allows you to set your own start-out Wattage.

Batteries and Firmware:

To power your new mod, you need 2 x 20700 batteries and with the included 2 x 18650 batteries.

At the front of the Mod, you'll find a Micro-USB port that can be used for updating the Firmware of the chip.
This ensures that you'll always have access to the latest features and functions.

Even though you can charge the batteries inside the box through the Micro-USB port, we strongly recommend that you always charge the batteries in an external charger to ensure they are charged 100% correct.

When using a mod with 2 batteries it is very important that you:

Get 2 new, strong batteries (minimum 30 Amp)
Make sure they are identical (same brand, same mAh and Amp limit).
Only to use them together and at the same time.
Charge them together and at the same time.

iJoy
13881
1 Item