Hugo Vapor - Hugo Vapor N BF RDA

Hugo Vapor N BF RDA

Hugo Vapor N RDA can be used for ordinary dripping or as a squonker as both 510 pins are included.

• 2 post Dual Coil deck.
• AFC with 2 air intakes, fully adjustable.
• Squonk ready. (BF pin included)
• 25mm in diameter.

Features:

• Made of Stainless Steel and PEEK.
• Only for dual coil setups.
• Huge building deck.
• Deep liquid well.
• 2 post design.
• Big post holes for exotic coils.
• Uses 810 drip tips. (One PEI 810 drip tip included)
• AFC with 2 big air intake, one on each side of the tube.
• Squonk ready. (BF pin included)
• Diameter: 25mm, height: 32mm.

Hugo Vapor N:

The Hugo Vapor N RDA is 25mm in diameter and only 32mm in height, it is made of quality Stainless Steel and of PEEK is used as insulator.
You can use N RDA in 2 ways, ordinary dripping where you use a bottle to drip on the wick, or on a squonk mod, you just need to replace the 510 pin with the provided one and you are ready to squonk.

The AFC is made with 2 big air intake on each side of the outer tube, and can be adjusted to your preferences by turning the top cap.

The deck:

N RDA have a nice big deck to build on, it is designed with 2 posts with huge holes for your coils, the coils are fastened with Philips head screws.
The liquid well is pretty deep, so you have plenty of room for cotton and e-liquid.

The positive post and the 2 screws are gold plated to ensure you get a low volt drop.

If you are new to RDA's remember that you might not make the perfect setup the first time, but keep trying you will get the hang of it and never go back. If you are using an RDA on a mechanical mod it is highly recommended that you use an ohm tester to ensure you know what resistance you have and to avoid any short that possibly could be dangerous.