Geekvape - Loop RDA
Geekvape Loop BF RDA
Loop gives you dual and single coil build, fully adjustable AFC.
- Single or dual coil setup.
- Postless W-Style deck.
- Deep liquid well.
- Size: 24mm x 34mm.
- Made of Stainless Steel.
- Postless W-style deck.
- Fully adjustable air flow.
- AFC ring on the outside of the topcap.
- Dual or single coil deck.
- 6.5mm Deep liquid well.
- Can be used with 810 and 510 drip tips.
- Squonk ready. (BF pin included)
- Diameter: 24mm, Height 34mm.
Loop BF RDA:
Loop RDA is made of Stainless Steel with PEEK used as insulators. The Loop RDA is 24mm in diameter and is approx. 30mm in height.
The deck has a W-style design, where the 4 posts are mounted on a slanted piece in the middle of the deck. The centre post is raised from the bottom; this design makes more room for liquid.
Loop RDA can be used for standard dripping where you drip direct on the coils, but also for Squonking. If you choose to use Loop on a squonk mod, you just have to exchange the 510 pin with the supplied BF pin.
Loop RDA comes with an 810 drip tip, but you can also use a standard 510 drip tip when using the included adapter.
The air flow comes from the side of the top cap, and you adjust it by turning the AFC ring, you can turn the AFC ring so one side is closed off if you want to use Loop for single coil.
The air inlets are designed so the air comes in to the deck, hits the coils underneath then runs up the sides of the coil.