Eleaf iStick Pico 21700 100W TC BoxMOD
  • Eleaf iStick Pico 21700 100W TC BoxMOD
  • Eleaf iStick Pico 21700 100W TC BoxMOD
  • Eleaf iStick Pico 21700 100W TC BoxMOD
  • Eleaf iStick Pico 21700 100W TC BoxMOD
  • Eleaf iStick Pico 21700 100W TC BoxMOD
  • Eleaf iStick Pico 21700 100W TC BoxMOD
  • Eleaf iStick Pico 21700 100W TC BoxMOD
  • Eleaf iStick Pico 21700 100W TC BoxMOD

Eleaf - iStick Pico 21700 100W TC Box MOD

Price: DKK399.00
Tax included
Colour
In stock

iStick Pico 21700 100W TC Box MOD

Uses a 21700 or 18650 battery, battery not included!

With Pico 21700 you can choose between 21700 and 18650 batteries.
You also get 100W and Temperature Control (TC).

  • Temperature control: 100 - 315°C / 200 - 600°F.
  • Variable Wattage: 1 - 100Watt.
  • Modes: VW, Bypass, Nickel, Titanium, Stainless Steel and TCR (M1, M2 and M3).
  • Uses one 21700 or one 18650 battery. (sold separately)
  • Updatable Firmware.
  • Can use tanks up to 25mm in diameter.

Features:

  • Updatable Firmware.
  • Variable Wattage from 1W - 100W.
  • In VW mode: Resistance between 0.1 - 3.5 Ohm.
  • Temperature Control: 100 - 315°C / 200 - 600°F.
  • In TC mode: Resistance between 0.05 -1.5 Ohm.
  • Modes: VW, Bypass, Nickel, Titanium, Stainless Steel and TCR (M1, M2 and M3).
  • Bright OLED screen.
  • Stealth-function.
  • 5 click on/off.
  • 2 clicks to enter the menu.
  • Stainless steel spring-loaded 510 connection.
  • Temperature alarm function.
  • Temperature protection.
  • 10 second cut off protection.
  • Atomiser short circuit protection.
  • Low voltage protection.
  • Low power alert.
  • Uses one 21700 flat top battery of minimum 30Amp or (by using the battery adapter) an 18650 battery of minimum 30 Amp.
  • Micro-USB port for charging and Firmware update.
  • Size: L: 51mm x B: 26mm x H: 77mm.

Design and operation:

The Pico 21700 will allow you to use two different sizes of battery. You can either use a large 21700 battery or mount the adapter to use an 18650 battery.
The design is very much like the standard Pico however the Pico 21700 has a larger battery compartment to allow for the use of a 21700 battery, it has a height of 77mm.
The Plus and Minus buttons and the Micro-USB port are on the bottom of the Mod for a clean design and the Fire button and OLED screen is well placed.

The iStick Pico 21700 uses a single 21700 battery that will let you vape from 1 - 100W, or an 18650 battery if you use the adapter.
You must use flat top batteries and they should be at least 30Amp.
You change the battery by unscrewing the "top" next to the 510 connection. Remember that the battery goes in plus first.

You turn the iStick Pico 21700 on and off by pressing Fire 5 times. When the Pico 21700 is off, you can rotate the screen by pressing and holding Plus and Minus.

When the Pico 21700 is on, press and hold Fire and Minus to go to Stealth-mode. You can now vape without the screen lighting up.

3 Different Vape Modes:

The iStick Pico 21700 offers three ways to vape: In normal VW Mode, Temperature Control (TC) Mode and Bypass Mode where it functions like a Mech Mod.
In VW and Bypass mode you can use resistances between 0.1 - 3.5Ohm.

Actually the Pico 21700 has 8 Modes. This is because it has 6 different TC Modes: Ni, Ti, SS, M1, M2 and M3.
The 6 different TC Modes allows you to use different wires for your coils. Basically you can choose between:
Ni (nickel), Ti (titanium), SS (stainless steel).
The last three Modes: M1 M2 and M3 are so called TCR (Temperature Coefficient of Resistance) that allows you to adjust the coefficient of your wire with absolute precision. So if you feel that the fixed Modes doesn't quite hit the spot, this will allow you to get exactly the settings that are right for your set-up.

You can vape between 100 - 315°C / 200 - 600°F and from 0.05 - 1.5 Ohm, so you have every chance to find the perfect vape for you.

Remember to lock your Ohm in TC mode as the chip needs a reference to determine the temperature of your coil.
You lock the Ohm by pressing and holding Fire and Up. The Ohm sign on the display will then switch to a padlock.

Update the Firmware:

You can charge the battery inside the iStick Pico 21700 by using the Micro-USB port at the bottom. However, even more importantly, you can update the Firmware of the chip through this port as well. That way you'll always have access to the latest features.

Eleaf
14039
53 Items