Eleaf - 2ml GS Drive Atomizer

2ml GS Drive Atomizer

The Eleaf GS Drive tank is part of the GS-tank series, but Drive has a top fill system.

• Easy top fill system.
• Will hold 2 ml e-juice.
• AFC (Air Flow Control).
• Diameter: 16.5mm, height: 56mm.

Features:

• Solid construction of stainless steel and pyrex glass.
• 510 connection.
• Adjustable AFC. (Air Flow Control)
• Easy top fill system.
• Juice capacity: 2 ml.
• For use with GS Air replaceable coils.
• 1 x 1.6Ohm (Pre-mounted) 1 x 0.75Ohm.
• Diameter 16.5 mm. Height approx. 56mm.

The design:

GS Drive tank has a diameter of 16.5mm and height of 56mm.

The tank will hold 2ml e-juice and is made of Pyrex. This means you can use any liquids even strong menthol without any risk of damaging the glass.
Eleaf have made GS Drive top fill, press the button at the side of the top and press against the arrow also placed on the top, then fill the tank through the hole in the insulator. push the topcap back and you are ready to vape again.

The drip tip is made as a sleeve, hold in place by 2 O-rings, so you can’t use standard 510 drip tips on the GS Drive tank.

The AFC is easily adjusted, simply turn the ring at the bottom of the tank.

The coils:

The GS Drive tank comes with two coils, pre-mounted in the tank is a 1.6Ohm coil that perform best between 5 and 10Watts and one coil on 0.75Ohm that works best between 8 and 25Watt.
The coils have a dual coil design and a 100% Organic cotton wick.

When mounting a new coil remember to drip a couple of drops of e-juice into all the juice holes on the coil. The fill the tank and leave it for 5-10 minutes to allow the wick to be completely soaked. If the wick is even a little dry it will burn when you use the tank.