Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD
  • Digiflavor Edge 200W TC BoxMOD

Digiflavor - Edge 200W TC MOD

Price: DKK449.00
Tax included
Colour
There are not enough products in stock

Digiflavor Edge 200W Mod

Uses 2x18650 (Batteries not included)

Edge from Digiflavor is a power mod, that will allow you to go all the way up to 200 watts, it also includes temperature control, and an OLED Color screen that gives you all the information you could ask for. To power the mod, you need two 18650 high drain batteries.

  • Ergonomic design.
  • Upgradable firmware via Micro-USB-C.
  • Variable Watt from 5W - 200W.
  • Large OLED color screen.
  • Use atomizers of:
  • 0.05 Ohm - 1.5 Ohm in Temperature mode.
  • 0.05 Ohm - 3.0 Ohm in Wattage mode.
  • Uses two 18650 batteries. Batteries must be flat top and it is suggested to use batteries with a minimum of 25 Amp. (Batteries not included)
  • Size - H: 90mm, W: 67 mm, L: 29mm.

With the Edge mod you got what you ever could need when vaping, it can deliver a low wattage and long battery life, or if you want high wattages but with lower battery life, furthermore it has many features, so you can get your vape experience exactly as you want.

Features:

  • Solid steel construction.
  • Gold plated spring-loaded 510 center pole.
  • Large OLED display showing: Ohm, Volt/Watt/Temperature and battery level etc.
  • Variable Watt from 5W - 200W.
  • Use atomizers of:
  • 0.05 Ohm - 1.5 Ohm in Temperature mode.
  • 0.05 Ohm - 3.0 Ohm in Wattage mode.
  • Temperature Control using Ni200, Titanium and Stainless Steel wire/coils.
  • Temperature: 100°-300°C (200°-600°F).
  • Uses two 18650 batteries with a minimum of 25 Amp.
  • We recommend that you charge the batteries in an external charger.
  • Firmware update via Micro-USB-C.
  • Max Volt output: 7.5Volt
  • 10-second cut-off.
  • 5 click on/off.
  • 3 clicks on Fire lets you switch between the different modes.
  • Use the "up" and "down" buttons to adjust settings, use fire to switch between the different settings.
  • Low Ohm protection.
  • Reverse battery protection.
  • Electronics overheat protection.
  • Size - H: 90mm, W: 67 mm, L: 29mm.

The Mod:

The Edge mod has a spring-loaded 510 centre pole that will ensure that most tanks will fit flush on your box.

The Fire button and "Up/Down" keys are well placed and the bright OLED color screen will tell you all you need to know.

The Edge mod has every safety feature available today.
Reverse battery protection, uneven battery discharge protection, short circuit protection, low resistance protection and temperature protection.

Temperature Control:

The Edge mod will take you all the way up to 200W in Wattage mode but it is equally for Temperature Controlled (TC) vaping.

It has designated settings for Nickel, Titanium or Stainless Steel wire/coils and you switch between the modes by pressing Fire 3 times rapidly, and use the "up" and "down" buttons to change between the different modes.

When vaping in TC mode it is pivotal to lock your Ohm. This has to be done at room temperature, the mod will ask you if a new coil is attached and when saying yes it locks the resistance. To get the most accurate resistance of the coil it is a good idea to turn off the mod, screw your tank on and then turn the mod on again, you are then sure the tank has a good connection to the 510 connector and the resistance will be more accurate.

Updatable Firmware etc.:

The firmware can be updated via the Micro-USB-C cable provided.

The batteries:

You need 2 x 18650 batteries to power the box, remember to place the batteries correctly according to the directions printed on the inside of the battery compartment.

To enter the battery compartment, press the release button that is placed on the bottom of the mod. 

When using a mod with 2 batteries it is important that you:

Get two new, strong batteries (minimum 25 Amp)
Make sure they are identical (same brand, same mAh and Amp limit).
Only to use them together and at the same time.
Charge them together and for the same amount of time.

Even though you can charge the batteries inside the mod, it is always recommended that you use an external charger, to ensure a correct charge of both batteries.

Digiflavor
19847