Aspire - Breeze 2 Pod
Aspire Breeze 2 Pod
Complete Pod/Tank from Aspire, to be used with the Breeze 2 kit.
- Materials used: Polycarbonate and Stainless Steel.
- Capacity approx. 2ml of E-liquid.
- One 0.6Ohm coil included with the Pod.
- Easy bottom fill.
- Adjustable air flow.
The Pod/Tank will hold approx. 2ml of e-liquid, to fill it you need to remove the Pod/Tank from your Breeze 2 battery part as it is filled from the bottom.
When you look at the bottom of the Pod/Tank, you will at one side see a small metal piece, that where you fill the liquid through, it is made with a spring loaded closing system to make is child proof.
The diameter of the fill hole is 3mm, please make sure the needle nose of your bottle will fit in the hole to activate the spring loaded automatic closing system.
Be aware that the tank is made from Polycarbonate plastic, this may not be suitable for all liquids.
One 0.6Ohm coil is included and mounted in the Pod when you get it. so you are more or less ready from start, you just need to prime the coil and fill the tank.
The coils are easily replaced, simply remove the mouth piece, you do not need to remove the Pod at all. When the mouth piece is removed you can see the metal part where the coil is mounted, to unscrew this part you need to push down and turn as Aspire have made the system child proof, and it is same procedure when you put it back on the Pod.
This part is also where the AFC is located, you can adjust it by turning the knurled part, to find your sweet spot.
It is always a good idea to drip a bit of e-liquid on the cotton in the coil and leave it to rest for 10-15 minutes with the tank full, before first use of a new coil.
That way you can avoid dry-hits and dry-burning the cotton.