Aspire - 1000mAh Breeze 2 AIO 2ml Starter Kit
Aspire Breeze 2 Start Kit
The Aspire Breeze 2: with exchangeable coils, adjustable Ari flow, Pod/Tank system and an ergonomic design.
- 1000 mAh battery.
- Compact System with Pod/Tank.
- Juice capacity: 2 ml.
- Size: 19mm x 35mm x 96mm.
- Materials: Aluminium and Polycarbonate.
- 1000 mAh internal battery.
- 5 click On/Off on the Fire button.
- The Pod/Tank will hold approx. 2ml e-juice.
- Easy to fill from the bottom.
- Uses Breeze and Breeze 2 U-tech coils.
- Battery protection.
- Size: 19mm x 35mm x 96mm.
Aspire Breeze 2 has a Fire button on the side that is used to turn the Mod On and Off (5 quick clicks)
Despite the fact that Aspire have used a 1000mAh in Breeze 2 its size is still ultra compact. The battery should keep you vaping for a good amount of time.
The Pod/Tank can hold approx. 2ml of e-liquid, to fill it you need to remove the Pod/Tank from your Breeze 2 battery part, to remove the Pod please press both buttons that is placed on either side, when pressed the Pod will "pop up" and can be removed with ease.
Then at the bottom of the Pod, you will at one side see a small metal piece that is the fill hole and it have a diameter of approx. 3mm, Aspire have made it spring loaded to make is child proof so make sure the needle nose of your bottle will fit in the hole to activate the spring loaded automatic closing system. When the Pod is filled, just place the Pod back in the Breeze 2 and press down on it, when you hear a little click it is placed as it should.
Be aware that the tank is made from Polycarbonate plastic, this may not be suitable for all liquids.
The Aspire Breeze 2 comes with two Breeze 2 U-Tech coils (1 x 0.6Ohm and 1 x 1.0 Ohm), you also have the option to use Breeze coils in the Breeze 2, but remember you cannot use Nautilus U-Tech coils in this device.
The coils are easily replaced, simply remove the mouth piece you do not need to remove the Pod at all, when the mouth piece is removed you can see the metal part where the coil is mounted, to unscrew this part you need to push down and turn as Aspire have made the system child proof, and it is same procedure when you put it back on the Pod.
This part is also where the AFC is located, you can adjust it by turning the knurled part.
It is always a good idea to drip a bit of e-liquid on the cotton in the coil and leave it to rest for 10-15 minutes with the tank full, before first use of a new coil.
That way you can avoid dry-hits and dry-burning the cotton.
The Breeze 2 has a built-in LED under the Pod/Tank, indicating the status of your battery:
- Blue - Orange: Over 3.8V.
- Blue: Between 3.8 - 3.5V
- Orange: Below 3.5V (Charging needed).
The Breeze 2 is easily with the Micro-USB cable provided, and can be charged with a maximum of 800mA.