Eleaf presents its Ijust Nexgen AIO kit at a time when the field of All In One vapers are as big as it has ever been.
So why should you keep an eye out for this particular set?
With a tank that can be extended from 2ml to 4ml capacity (thus allowing you to choose between compactness and volume), a battery of 3000 mAh with a fast-charge option (by use of a 1 Amp charger) and power enough to handle resistances as low as 0.15Ohm, this is a kit that is perfect for anyone who wants powerful sub ohm vaping in the easiest possible way.
Max 50W output.
Volt output from 3.3V - 4.2V.
Will run atomizers as low as 0.15Ohm.
Tank capacity: 2 or 4ml (by use of the long glass and the chimney extender).
Diameter 24.5mm, total length 117mm.
The Ijust Nexgen is an "all-in-one" e-cigarette where battery and tank are combined into one single unit.
Made of stainless steel.
Volt output: 3.3V - 4.2V.
Max 50W output.
Will run resistances between 0.15 - 3.5Ohm
Springloaded 510 connection.
Charging via the Micro-USB port.
5 click on/off.
10 second cut off.
Low Volt warning: LED will flash.
Low Volt protection: At 3.3V the battery shuts dow and blink 40 times. You can turn it back on when it's charged to 3.7V
LED displays battery level:
9-0% Red - time for a charge.
Atomizer short protection.
Charging time using a 1 Amp charger: Approx. 4 hours.
Made of Stainless steel.
AFC (Air Flow Control) adjustment by mounting the rubber band over the airholes.
510 drip tip compatible.
2 replaceable HW1 coils included:
0.2 Ohm coil.
Stainless 316 steel wire in a parallel vertical set-up.
100% organic cotton wick.
Best performance between 40 - 80Watt.
Liquid capacity 2/4ml.
Diameter 24.5mm, length 117mm
The Ijust Nexgen kit is certainly "good vaping in a handful".
The keywords for this vaper are:
2/4 ml juice capacity.
Long battery life.
Easy to use.
The battery of 3000 mAh can be fully charged with a 1 Amp charger in about 4 hours via the Micro-USB port. This makes this a steam canon you can bring along everywhere to get perfect vaping pleasure wherever you are.
The battery has 5 click on/off and as mentioned you can go as low as 0.15 Ohm. That is low!
It has all the necessary safety features like short circuit protection, over charge protection and low Volt protection (at 3.3V the battery shuts dow and blink 40 times. You can turn I back on when it's charged to 3.7V).
The iJust Nexgen battery functions similar to a mechanical Mod.
When fully charged it will deliver 4.2 Volt and then slowly drop as you use it.
The kit has a diameter of 24.5mm, a total length of 117mm is made from stainless steel and has a spring loaded 510 connection.
To re-fill the tank, simply find the small arrow on the top cap and push it back in order to open the fill hole. The fill your tank, push the top cap back in place...and you're ready to vape on.
The tank is 510 drip tip compatible and you get a steel wide bore drip tip with double O-rings in the set.
The AFC is quite unique.
If you want it fully open simply use it as it is.
If you desire a tighter draw you need to use the rubber band supplied and mount it over the holes. You can then adjust the flow to your liking.
The iJust Nexgen kit comes with 2 coils:
2 x 0.2 Ohm HW1 (High Watt 1) coils (one is pre-mounted). The coils features a dual parallel vertical design with stainless 316L steel wire and a 100% organic cotton Wick. They will perform best between 40 - 80Watt.
The kit contains:
1 x Eleaf Ijust Nexgen AIO 3000mAh.
2 x HW1 coils of 0.2 Ohm (one is pre-mounted).
1 x 510 Drip tip.
1 x Extra long pyrex glass tube.
1 x Extender for the chimney.
1 x USB charging cable
¹What is “Sub Ohm”?
The short version is that sub ohm is vaping on a coil with a resistance lower than 1.0 Ohm.
Ohm is the resistance of the wire in your coil.
What do you need to know when you want to vape sub ohm?
First of all, you need to get batteries that are strong enough for sub ohm as it requires a lot of Amps (Amps denote the power of a battery, mAh tells you how long a battery can run before it needs recharging).
If you use a mechanical (mech) Mod, which is an e-cigarette without any form of electronics, it is pivotal that you know what you are doing as a mech Mod does not have any safety-features that can stop accidents from happening
To determine the correct battery/coil set up on a mech Mod, you need to know and understand Ohm’s Law.
A sub ohm coil will usually require more power (Wattage/Voltage) than a coil with a higher Ohm, especially if you go below 0.5 Ohm.
Sub ohm will usually give you a hotter and more powerful vapour, which might not be what you are looking for if you are a “regular vaper”.
However, if you like a plentiful and powerful vape, sub ohm is probably right for you.
When vaping sub ohm, you will normally use “Direct Lung inhalation” where you suck the vape directly into your lungs as opposed to more “cigarette-like” vaping where you suck the vapour into your mouth and then make a second inhalation to get it into your lungs.
Direct Lung inhalation takes a bit of practice and is not right for everyone but a lot of vapers love it when they have got used to it.
Another difference between sub ohm and “regular” vaping is that when you vape sub ohm the amount of e-liquid you use will often increase, simply because more power will vaporise more e-juice.