Pink Mule S.L.
Boletim informativo
email icon

newsletter


Subscreva-se!

Ehpro Bachelor Nano RTA/RBA Tank - 2ml - Ø23mm - Black

Preço: DKR 247.50
Sem impostos: DKR 198.00
Marca: Andre
Código do produto: TNKF86
Tamanho: 23 x 23 x 62.5
Disponibilidade: Em estoque

Acessórios


Kanthal A1 Wire - 0.30mm (AWG29) - 10m Kanthal A1 Wire - 0.30mm (AWG29) - 10m DKR 26.86 Qtd:
Kanthal A1 Wire - 0.32mm (AWG28) - 10m Kanthal A1 Wire - 0.32mm (AWG28) - 10m DKR 27.75 Qtd:
Kanthal A1 Wire - 0.35mm (AWG27.25) - 10m Kanthal A1 Wire - 0.35mm (AWG27.25) - 10m DKR 26.86 Qtd:
GeekVape 521 Tab GeekVape 521 Tab DKR 249.00 Qtd:
Youde Coil Jig Set Youde Coil Jig Set DKR 56.25 Qtd:
Acessórios geral:
0.0
O produto total com acessórios:
DKR 247.50

 

 

small, smart, delicious

The Ehpro Batchelor Nano RTA tank compact Vape-Wonder that features top fill, room for 2ml e-juice, an excellent AFC and a post less RBA deck designed for single coil builds.
It is perfect for both mouth-to-lung and direct lung inhalation so it's no exaggeration to say that this is an RBA for everyone!
 

  • Made from stainless steel and pyrex glass.
  • Post-less RBA deck design. Single coil only.
  • Juiceflow control.
  • Top-fill.
  • Juice capcity: Aprox 2ml.
  • Size: diameter 23 mm, height 41.5 mm (exclusive 510 connection and drip tip).


The Batchelor Nano is an RTA (Rebuildable Tank Atomizer) and not a tank for use with ready made coils.
This makes it a bit more labour intensive but at the same time it gives you the possibillity to build the coil exactly the way you want it and therefore shape the vape-experience to perfection.
 

Features:

  • Made from stainless steel and pyrex glass.
  • Post-less RBA deck design. Single coil only.
  • 510 connection with a copper pole.
  • 510 Delrin/steel isolated Drip tip.
  • Juice capcity: Aprox. 2ml.
  • Easy Top fill.
  • AFC (Air Flow Control) two 7mm x 2mm slots.
  • Adjustable juice flow.
  • 1 x Pre-made 0.5 Ohm Kanthal coil with 100% Japanese organic Cotton pre-mounted in the tank.
  • 1 x Pre-made 0.2 Ohm Ni200 coil with 100% Japanese organic Cotton.
  • PEEK insulators.
  • Size: diameter 23 mm, height 41,5 mm. (without 510 connection and drip tip).


The Batchelor Nano is made from stainless steel and has a pyrex glass tube.
The (non-adjustable) 510 has a copper pole for maximum conductivity, PEEK insulators ensures heat-tolerance and the post-less deck design is easy and comfortable to build on.

Post-less RBA deck:

One of the best features of the Batchelor Nano RTA is the so called post less deck design.
As the name indicates the traditional deck with X amount of plus and minus posts are gone and has been replaced with a system that have a lot of advantages.

The idea is simply that you put the coil wire straight into the holes in the deck and tighten them. The coil is simply mounted on the bottom of the deck itself.
There are several reasons why this is a good idea.
First of all it is easy. Simply put the ends of the wire into the holes and fasten them with the screws on the side of the tank.
This design also gives you a lot of space to work on especially when using a thick advanced wire like Clapton or spun wire.
Finally you will get a very powerful vape, as the wire gets maximum conductivity when it is more or less build straight into the deck.

Please note that you should be careful when snipping bits off the ends of the wire to find the perfect placement of your coil. If you cut off too much the coil will touch the bottom of the deck and create a short circuit.
Cut off a little bit at the time.
*Note: Watch the video to the right for a demonstration of a build.

The Batchelor Nano RTA is made for single coil builds only and it may take some time for you to find the perfect set-up for the wire and the wick, but when you do, the angels will sing!

Easy top fill:

Please remember to close off the juice flow before filling the Batchelor Nano RTA.
To fill the tank simply twist the top of the tank and fill the juice into the holes in the white insulator.
After filling twist the top back on, open the juice flow and you are ready to vape on.
The tank will hold aprox. 2ml of e-juice.
Remember to turn the tank upside down when re-opening the juice flow control to avoid flodding of your coil.

Airflow Control:

The AFC is generous and easy to adjust to the pull you prefer.
You get two 2 x 7mm airslots at the bottom that can be adjusted to either a loose lung-hit or a tighter mouth-to-lung inhalation.

The Batchelor Nano uses a standard 510 drip tip. The drip tip provided with the Mod is made from stainless steel with a delrin core for heat protection when vaping at high Watts.

Adjustable juice flow:

The brilliant adjustable juice flow allows you to set the flow according to which e-juice you're using whether it's a thin PG-based liquid or a thicker VG juice.
To adjust the juice flow on the Batchelor Nano simply turn the top part with the glass to "O" open or "C" closed.
Remember to always have the juice flow open when vaping.
 

Purchase is for:

  • 1 x Bachelor Nano RTA tank - Black.
  • 1 x Spare Pyrex tank tube.
  • 1 x Widebore 510 steel/delrin drip tip.
  • 1 x Pre-made 0.5 Ohm Kanthal coil with 100% Japanese organic Cotton pre-mounted in the tank.
  • 1 x Pre-made 0.2 Ohm Ni200 coil with 100% Japanese organic Cotton.
  • 1 x Allen key.
  • Spare screws and O-rings.


Please remember to wash the atomizer thoroughly before use.


*Purchase is for above listed items only. Other products are shown as inspiration.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Escreva uma avaliação

Seu nome:


Avaliação: Note: HTML não foi traduzido!

Classificação: Ruim           Bom

Digite o código no campo abaixo:




#

Sim, eu gostaria de chamar-me!

Lembre-se de código de país
Exemplo: 0039 xxxx

email icon

telefone

#

For you who wants to start waping...

We have compiled instructions, offers and more.

Read more

email icon

new to vape