Aspire has macde what is probably the best RBA coil unit to date.
The unit is made for the Cleito tank and is acyually called an RTA because the decks design is very close to an RTA.
Made from stainless steel.
2 post Velocity style rba deck with four 2mm wire holes.
Pre-mounted 0.4 Ohm dual Clapton coils.
Two large juice holes of aprox. 5 x 2mm.
Two bottom airholes with a diameter of aprox. 5mm.
The RTA coil (Rebuildable Tank Atomizer) features a 2 post Velocity style deck with four 2mm wire holes that will allow you to use even thick wire.
The base consists of 3 pieces: The bottom and a two-piece chimney.
The coils have 4 large juiceholes of aprox. 5 x 2mm and two 5mm airholes that hits the coil directly.
The Cleito RTA coil comes pre-mounted with two Clapton coils with a resistance of 0.4 Ohm so all you need to do is to wick it and you're good to go.
Please note that this RTA coil reduces the liquid capacity of the Cleito to about 1ml of juice.
With the coil comes the following spare parts:
8 spare post screws.
You also get a handy allen key.
Remember to not tuck the cotton too hard in the juice channels.
It's a matter of trial and error but one you get it just right you'll enjoy every puff.
Purchase is for:
1 x RTA base for the Aspire Cleito tank.
2 x Pre-mounted 0.4 Ohm dual Clapton coils.
8 x Spare screws.
1 x Allen key.
Bag with spare O-rings.
One piece of 100% Organic Japanese cotton.
*When you make your own coil it is pivotal to measure your ohm's before you use the coil.
You can use an ohm meter like this one.
**Please make sure that your e-cigarette can handle subohm if you use coils of lower than aprox 1.0 Ohm.